Posted by Jeff on February 02, 2001 at 07:01:51:
In Reply to: Re: 12 and 0.0833333 default DW settings posted by Gary on February 01, 2001 at 21:24:37:
I am sorry if I have taken this to far. NO, your assumption of needing to use both is incorrect. You ONLY need to set the Scale Factor to 2.54 (1 inch = 2.54) when Artlantis prompts you when opening a DXF file. That is the simple solution. Don't worry about changing anything in DW. That is probably the best solution for either MAC or Windows users.
DXF files are in "inches"
DW files are in "feet"
Artlantis files need to end up in "cm"
Again, I am sorry for over complicating this issue.
This is a discussion forum archive page.
For continuing discussion, please visit our updated Open 3D CAD Forum.
| User Gallery
| Architecture Forum
| E-Design Forum
|Home | CAD Outpost | DesignWorkshop | Great Buildings | RenderCity | Free 3D | Gallery | Support | Search | Index|
|This document is provided for on-line viewing only.||http://www.DesignCommunity.com/forum/5839.html|