Artifice 
  3D Design 
  Community 
  Discussion
 

Message - Re: Disappointing Discovery

    Follow Ups | Post Followup | DesignWorkshop Forum | Great Buildings Forum    

Posted by  Bob Sprague on February 15, 2001 at 00:21:21:

In Reply to:  Re: Disappointing Discovery posted by Jeff on February 10, 2001 at 09:53:42:

I have found that you can "split up" an element by "REAPPLYING" material dialog. Then carefully select away at the
portions that "should be" a different material. It should be easy with simple polygonal solids, but a bit more precision is required if you are working with a "mega-faceted" object (ala a warped plywood surface.

Try it out if you get stuck!

BOB

 


This is a discussion forum archive page.

For continuing discussion, please visit our updated Open 3D CAD Forum.
 

DesignWorkshop Forum | User Gallery | Architecture Forum | Scrapbook | E-Design Forum | ArchitectureWeek
 
Artifice, Inc. ...the way of architecture.

Home | CAD Outpost | DesignWorkshop | Great Buildings | RenderCity | Free 3D | Gallery | Support | Search | Index
This document is provided for on-line viewing only. http://www.DesignCommunity.com/forum/5870.html