Hey all!

Goto page 1, 2, 3  Next
 
Post new topic Reply to topic
   ArchitectureWeek DesignCommunity Forum Index » Architecture Forum
View previous topic :: View next topic  
Author Message
ensurrydeenna



Joined: 22 Aug 2008
Posts: 1

PostPosted: Fri Aug 22, 2008 2:38 am    Post subject: Hey all! Reply with quoteFind all posts by ensurrydeenna

As newly registred member i only wanted to say hi to all, even though i know that nobody really gives a damn Smile
Back to top
View user's profileSend private messageSend e-mail    share:   blogger     del.icio.us     digg     slashdot    
cousinbirgco



Joined: 15 Aug 2008
Posts: 78

PostPosted: Fri Aug 22, 2008 3:40 am    Post subject: Reply with quoteFind all posts by cousinbirgco

Well hello, that's not true, I really care.......everyone here really cares..........this is a really caring forum.



..........come to think of it, you're right, nobody does give a damn. Very Happy
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
Checkpoint43



Joined: 22 Mar 2007
Posts: 81
Location: Lexington, VA

PostPosted: Fri Aug 22, 2008 7:50 am    Post subject: Reply with quoteFind all posts by Checkpoint43

If you wanted a dam, you should have called an engineer.
Back to top
View user's profileSend private messageVisit poster's website    share:   blogger     del.icio.us     digg     slashdot    
cryingbaby615



Joined: 19 Oct 2007
Posts: 4

PostPosted: Fri Aug 22, 2008 10:45 am    Post subject: Reply with quoteFind all posts by cryingbaby615

Hi...hope you will enjoy it Very Happy
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
csintexas
millennium club


Joined: 06 Feb 2006
Posts: 1960
Location: USA

PostPosted: Fri Aug 22, 2008 6:10 pm    Post subject: Reply with quoteFind all posts by csintexas

I care so much I can hardly stand it.

I gave a dam and swan built a boat.

_________________
Chris Stewart
Modern Texas Home Project
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
ArtisticAthlete32



Joined: 22 Aug 2008
Posts: 6

PostPosted: Fri Aug 22, 2008 6:43 pm    Post subject: Reply with quoteFind all posts by ArtisticAthlete32

I give a damn! From one newbie to another...hello! But, you're right...no one gives a damn; I can't get an answer to my 1st post but it's all good Wink lol

"Just searching for a little Arch-Info"
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
cousineddie



Joined: 22 Aug 2008
Posts: 38

PostPosted: Fri Aug 22, 2008 7:03 pm    Post subject: Reply with quoteFind all posts by cousineddie

Well hey everybody, I'm new here too and my name is cousineddie.

You probably know my cousin birgco. He's one of them smartalecky cityslickers but he's my cousin anyway.
He told me about this here forum so I wanted to try it out fer myself.
I'm not no fancy designer or archetek, but I'm pretty good at puttin' things together and figurin stuff out.
So I hope to be seein more of all of you all from time to time.

bye fer now. Very Happy
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
lekizz
millennium club


Joined: 11 Jan 2006
Posts: 1130
Location: UK

PostPosted: Sat Aug 23, 2008 1:26 am    Post subject: Reply with quoteFind all posts by lekizz

Sounds like a classic case of in-breeding *confused look*
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
djswan



Joined: 17 Aug 2007
Posts: 887
Location: Montana, USA

PostPosted: Sun Aug 24, 2008 8:15 am    Post subject: Reply with quoteFind all posts by djswan

Mating with the trades, might stop the "in-breeding" problem. Laughing
_________________
n/a
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
cousinbirgco



Joined: 15 Aug 2008
Posts: 78

PostPosted: Sun Aug 24, 2008 2:36 pm    Post subject: Reply with quoteFind all posts by cousinbirgco

OMG! Please, please, please don't try to "rile him up" (as he would say). He's basically a very good person but he has no tolerance for joking around about his "condition". If you saw Deliverance , you'd think twice about "funnin" with him. If it goes too far there's only so much I can do anyway. And btw, if he sets his mind to ya, you better hope he thinks the UK is Ukraine and Montana is somewhere in Canada!
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
djswan



Joined: 17 Aug 2007
Posts: 887
Location: Montana, USA

PostPosted: Mon Aug 25, 2008 1:16 pm    Post subject: Reply with quoteFind all posts by djswan

I care enough to advise poking smelly things with a stick first, it keeps your curiosity at a safe distance, and thus protects the fragile ego.
_________________
n/a
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
starkca3



Joined: 10 Jul 2008
Posts: 118

PostPosted: Mon Aug 25, 2008 10:06 pm    Post subject: Reply with quoteFind all posts by starkca3

I care! see...we all just want to tell you we care, because we care. Very Happy Very Happy


ok not really....
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
djswan



Joined: 17 Aug 2007
Posts: 887
Location: Montana, USA

PostPosted: Tue Aug 26, 2008 8:34 am    Post subject: Reply with quoteFind all posts by djswan

I'm demanding a 15% increase in caringness on this forum. To lead by example, I will be increasing the caringness of each new post by at least 20% to make up for the slackers.

It could be a new and improved signature for me.

**n/a** NOW! with 20% more caringness!!!

ahhh, forget it.

_________________
n/a
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
csintexas
millennium club


Joined: 06 Feb 2006
Posts: 1960
Location: USA

PostPosted: Tue Aug 26, 2008 9:21 am    Post subject: Reply with quoteFind all posts by csintexas

Hi cousineddie, I hope you're not a trouble maker like your cousin birgco

this is a very caring and sensitive forum.

_________________
Chris Stewart
Modern Texas Home Project
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
cousineddie



Joined: 22 Aug 2008
Posts: 38

PostPosted: Tue Aug 26, 2008 3:19 pm    Post subject: Reply with quoteFind all posts by cousineddie

Well hells bells, anyone from Texas is ok in my book. It's these smartass cityslickers like ole cousinbirgco gettin me sore all the time. He thinks he's smarter than me but he's mostly all talk. Why one time I had to showd him how to hook a worm when we was fishin down by the pond, all squeemish just like a girl. One thing, he ain't as bad as them foriners like that lekiss or whatever his name is. If I'm ever in the Ukraine, he best mind his manners. Talk to ya'll later. Very Happy
(I really like these little faces, thought I try one on fer size, hope thats ok)
Back to top
View user's profileSend private message    share:   blogger     del.icio.us     digg     slashdot    
Display posts from previous:   
Post new topic Reply to topic
   ArchitectureWeek DesignCommunity Forum Index » Architecture Forum Page 1 of 3
Goto page 1, 2, 3  Next

 




Latest Posts   ·   ArchWeek Jobs Board   ·   Classifieds   ·   User Galleries   ·   Scrapbook   ·   Open 3D Gallery
 Architecture Search   by name of Building, Architect, or Place:  
Buildings     Architects     Types & Styles     Places     Models     GB Image Index     ArchWeek Library
Professional Directory   Web Directory   Competitions   Conferences   Events & Exhibits     Products     Media Kit
DesignCommunity   ·   ArchWeek   ·   Great Buildings   ·   Archiplanet   ·   Books   ·   Blogs   ·   Free 3D   ·   Search
© 2004-2008 Artifice, Inc. · Powered by phpBB © 2001, 2002 phpBB Group
Thème myApple v2.0.1 créé par myTemplate