Axon or Oblique
Axon or Oblique
HI. can anybody help me get an axonometric or plan oblique view of a 3d model?
I would highly appreciate it.
thanks
pooya
I would highly appreciate it.
thanks
pooya
- Pooya_k
- Posts: 2
- Joined: Fri Dec 16, 2005 12:15 am
That's as easy as selecting axonometric from the view menu... but perhaps you meant something a little different? The more details you provide the better the forum members can help you.
- Steel Shade
- Posts: 45
- Joined: Fri Jul 29, 2005 3:46 pm
- Location: Diamond Bar, CA
plan oblique
Isometric is easy, but axonometric and plan obliques are another story. I haven't been able to find a way during the hour or so that I've looked. For those of you who don't know, axonometrics and plan obliques are measured. This means that every line on the drawing is proportional to the actual length of the corresponding line on the model. Plan obliques are unique in that all of the corners on the horizontal planes are square, so you can take the plan right off of the drawing.
- pmac7
- Posts: 1
- Joined: Mon Apr 23, 2007 6:11 pm
3 posts
• Page 1 of 1
Return to DesignWorkshop Discussion
Who is online
Users browsing this forum: No registered users and 3 guests