Artifice 
  3D Design 
  Community 
  Discussion

Message - Re: Pasting into Sloped Openings

    Follow Ups | Post Followup | Artifice 3D Board | Great Buildings Board        

Posted by  Mike Wheeler on November 02, 1998 at 15:55:07:

In Reply to:  Pasting into Sloped Openings posted by Anne Crowley on November 02, 1998 at 14:52:05:

Hello Anne,

Thank you for contacting Artifice Support.

At this point Paste Into Opening does not work on sloped openings, as you discovered.

It is still pretty easy to put frames in these openings though.

Set your working orientation to match the slope of the roof. To do this use the Faces Tool to select the sloped face of the roof. Now double-click on the Arbitrary Working Orientation, it is right above the Look Tool in thr Tool Palette. This sets the workjing orientation to the selected face.

Now make a window frame of the appropriate size. Position it to fit in the opening and then just duplicate it and put it in all the other skylights. You could also do this with a premade frame by rotating it to match the slope of the roof and positioning/scaling it into the opening.

Please let us know when you have further questions.

Thanks,

Mike Wheeler
support@artifice.com


Follow Up Messages:




Post a Follow Up Message -


Please post continuing discussion to the New Open 3D Forum.

To join in and post to the new DesignCommunity forums:

    1) Go to our new forums area.
    2) Register with your valid email address.
    3) Receive and respond to the confirmation email.
    4) Then login with us, in the new forum system!



 

Follow Up Messages | Post a Follow Up | Artifice 3D Board | User Gallery | Great Buildings Board | Scrapbook
 
Artifice, Inc. ...the way of architecture.

Artifice | CAD Outpost | DesignWorkshop | Great Buildings | RenderCity | Free 3D | Gallery | Support | Search | Index
This document is provided for on-line viewing only.

http://www.designcommunity.com/messages/1102.html