Artifice 
  3D Design 
  Community 
  Discussion

Message - Re: sun setting

    Follow Ups | Post Followup | Artifice 3D Board | Great Buildings Board        

Posted by  Mike Wheeler on November 24, 1998 at 12:11:30:

In Reply to:  sun setting posted by kenkuhlman on November 24, 1998 at 07:25:03:

Hello Ken,

One way to get whiter walls is to go to a Lights and Textures view and use the View menu, Lighting > Less Contrast command, possibly in combination with the View menu, Lighting > Brighten Sun command.

To do exactly what you are asking use the Arrange menu, Sun and Shading Settings command. Set the time to 12:00 so the sun is due South of your model. Set the date to 3/21. Set the latitude to 90 degrees to make the sun be right at the horizon.

Your method will make south facing walls be very white, but walls facing other directions will be dark, as they are receiving no direct sunlight. If you instead turn the contrast down in the Lights and Textures view you will make walls brighter regardless of their orientation.

Please let us know whenever you have other questions.

Thanks,

Mike Wheeler
support@artifice.com


Follow Up Messages:




Post a Follow Up Message -


Please post continuing discussion to the New Open 3D Forum.

To join in and post to the new DesignCommunity forums:

    1) Go to our new forums area.
    2) Register with your valid email address.
    3) Receive and respond to the confirmation email.
    4) Then login with us, in the new forum system!



 

Follow Up Messages | Post a Follow Up | Artifice 3D Board | User Gallery | Great Buildings Board | Scrapbook
 
Artifice, Inc. ...the way of architecture.

Artifice | CAD Outpost | DesignWorkshop | Great Buildings | RenderCity | Free 3D | Gallery | Support | Search | Index
This document is provided for on-line viewing only.

http://www.designcommunity.com/messages/1258.html