Artifice 
  Design 
  Community 
  Discussion 
   
 

Message - Domes and Openings

    Follow Ups | Post Followup | Artifice Message Board        

Posted by  Bob on December 24, 1998 at 12:04:51:

Here I am in Minneapolis for the Holidays. We're on the way to Wisconsin to meet with a client who wants a dome house. I've made progress generating domes with the lathe tool, but not with duplicate miter tool. I made a double closed arc with the polyline tool, ninty degrees, gave it a foot thickness and tried to rotate it around an axis that ran through the arc. It seemed to become a single line and no dome.

Also the lathe dome could not be given openings with either tool. I was able to make small retangular openings that stayed within the facet borders. Could not cross the borders. Openings are essential, so I hope there is a way to do them!

Gratefull for any help...

Bob


Follow Up Messages:




Post a Follow Up Message -

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:

Follow Up Messages | Post a Follow Up | Artifice Message Board
 

Artifice Foyer | DesignWorkshop | Great Buildings | CAD Store | Free 3D | Gallery | Support | Search | Index
This document is provided for on-line viewing only. http://www.designcommunity.com/messages/1414.html