Artifice, Inc.
Message Board


Re: DesignWorkshop to PowerCADD


    Follow Ups | Post Followup | Artifice Message Board    

Posted by Mike Wheeler, Artifice, Technical Support on February 26, 1997 at 10:14:53:

In Reply to: Re: DesignWorkshop to PowerCADD posted by Shane Chism on February 26, 1997 at 07:53:15:

The PowerCADD XTNL is included both with PowerCADD 3.0 and DesignWorkshop 1.5. The DesignWorkshop translator is built into DesignWorkshop 1.5, so there are no additional files needed.

The PowerCADD XTNL does not work with any version of PowerCADD prior to 3.0. DesignWorkshop 1.5 is the first version to have the ability to translate in this format.

To take advantage of it you will need to upgrade both PowerCADD and DesignWorkshop. The DesignWorkshop upgrade is well worth the money (in my obviously biased opinion), for the added features, the added stability, and the free upgrades through DesignWorkshop 2.0

In the meantime using PowerCADD 2.0 and DesignWorkshop 1.2 you can exchange files in DXF or object PICT format.

Mike Wheeler
wheeler@artifice.com


Follow Ups:



Post a Followup

Name:
E-Mail:

Subject:

Comments:

Optional Link URL:
Link Title:
Optional Image URL:


[ Follow Ups ] [ Post Followup ] [ Artifice Message Board ]


Artifice Foyer | Technical Support | Free Software | Artifice Gallery | Artifice Index
This document is provided for on-line viewing only. © 1996 Artifice, Inc. - All Rights Reserved

http://www.designcommunity.com/messages/34.html