DesignCommunity PowerCADD Forum-Macintosh 2D Drawing, Drafting, & Design

	DesignCommunity PowerCADD Drawing & Drafting Discussion
Engineered Software \| WildTools \| Drawing Room \| Here's How \| PowerCADD Downloads \| Bull Pen \| Free 3D \| DesignWorkshop \| CAD Outpost DesignCommunity \| DesignWorkshop 3D CAD Forum \| Open 3D Forum \| 3D Gallery \| GBC \| Architecture Forum \| ArchitectureWeek \| Search
Special thanks to our Sustaining Subscribers including BuilderSpace.com .
This Design Community web area is maintained by Artifice for discussion related to 2D CAD PowerCADD,and WildTools in particular, and architectural drawing and drafting related topics in general. This forum is moderated by the Artifice Customer Support Team.

This is an archive page. Please visit our New PowerCADD Forum to post a message!

contact forum administrator - Bill Stanley 23:23:31 4/19/2004 (1)
- Re: contact forum administrator - Kevin Matthews 23:50:27 4/20/2004 (0)
Fonts and crashes - Bill Stanley 14:16:42 4/19/2004 (0)
Two win2k computers - Julia Sourray 09:51:09 4/19/2004 (0)
New Forum - Alfred Scott 13:36:33 4/16/2004 (4)
- Re: New Forum - Signed Up OK - David M 21:31:45 4/17/2004 (0)
- Re: New Forum - Rolando 17:02:15 4/16/2004 (2)
  - Re: New Forum - Rob Coolidge 20:04:40 4/16/2004 (1)
    - Re: New Forum - Rob Coolidge 20:34:56 4/16/2004 (0)
mac parts - Amir 09:00:33 4/16/2004 (0)
I REGISTERED ON THE NEW FORUM AND... - Ron Gillespie 05:46:17 4/16/2004 (3)
- Re: I REGISTERED ON THE NEW FORUM AND... - Rob Coolidge 19:58:15 4/16/2004 (2)
  - Re: I REGISTERED ON THE NEW FORUM AND... - Jeff Hassell 08:08:14 4/17/2004 (1)
    - Re: I REGISTERED....FOUND - Jeff Hassell 08:17:58 4/17/2004 (0)
PowerCADD 6.1.0 Update - David M 00:38:53 4/16/2004 (0)
HP Deskjet 9650 - David M 23:51:05 4/15/2004 (2)
- Re: HP Deskjet 9650 - Derek D 04:38:00 4/16/2004 (1)
  - New forum is not much use if you can't log in - Rolando 17:10:16 4/16/2004 (0)
New Forum - Where are you going? - David M 22:37:36 4/15/2004 (2)
- Re: New Forum - Where are you going? - Jeffrey Jakucyk 04:29:24 4/16/2004 (1)
  - Re: New Forum - Where are you going? - David M 09:05:26 4/16/2004 (0)
NewTools now available in the WildTools ThinkTank - Alfred Scott 10:08:14 4/15/2004 (1)
- Re: NewTools now available in the WildTools ThinkTank - Les 13:24:56 4/15/2004 (0)
NEW TOOLS - Les 09:22:21 4/15/2004 (1)
- Re: NEW TOOLS - Brad Miller 09:36:59 4/15/2004 (0)
disappearing toolbars or boxes - Jason 12:45:07 4/14/2004 (2)
- Re: disappearing toolbars or boxes - Jason L o c h e r 19:33:51 4/14/2004 (0)
- Re: disappearing toolbars or boxes - Mr E 13:22:46 4/14/2004 (0)
New DesignCommunity.com PowerCADD Forum - Kevin Matthews 17:43:30 4/13/2004 (31)
- Re: New DesignCommunity.com PowerCADD Forum - Bill 22:48:54 4/15/2004 (1)
  - Re: New DesignCommunity.com PowerCADD Forum - Bill 12:56:02 4/16/2004 (0)
- Re: New DesignCommunity.com PowerCADD Forum - Mr E 13:26:43 4/14/2004 (0)
- Re: New DesignCommunity.com PowerCADD Forum - Alfred Scott 06:44:46 4/14/2004 (22)
  - Re: New DesignCommunity.com PowerCADD Forum - huc 07:13:21 4/14/2004 (21)
    - Re: New DesignCommunity.com PowerCADD Forum - Alfred Scott 07:55:41 4/14/2004 (20)
      - Re: New DesignCommunity.com PowerCADD Forum - huc 08:16:41 4/14/2004 (19)
        
        Re: New DesignCommunity.com PowerCADD Forum - John Morse 08:49:30 4/14/2004 (18)
        
        Re: New DesignCommunity.com PowerCADD Forum - Alfred Scott 09:44:56 4/14/2004 (17)
        
        Re: New DesignCommunity.com PowerCADD Forum - Mike Wheeler 10:16:55 4/14/2004 (16)
        
        Re: New DesignCommunity.com PowerCADD Forum - J Richardson 10:18:56 4/16/2004 (2)
        
        Re: New DesignCommunity.com PowerCADD Forum - New Forum Member 48 13:01:09 4/16/2004 (0)
        
        Re: New DesignCommunity.com PowerCADD Forum - huc 11:26:02 4/16/2004 (0)
        
        Re: New DesignCommunity.com PowerCADD Forum - Alfred Scott 11:11:14 4/14/2004 (12)
        
        programmer mentality - Mr E 13:24:35 4/14/2004 (1)
        
        Re: programmer mentality - Bill 15:52:41 4/14/2004 (0)
        
        Re: New DesignCommunity.com PowerCADD Forum - Mike Wheeler 11:17:17 4/14/2004 (9)
        
        Re: New DesignCommunity.com PowerCADD Forum - Bill Stanley 12:06:02 4/15/2004 (0)
        
        Re: New DesignCommunity.com PowerCADD Forum - Michael Spencer 04:27:46 4/15/2004 (7)
        
        Re: New DesignCommunity.com PowerCADD Forum - Rob Coolidge 20:43:12 4/15/2004 (6)
        
        Re: New DesignCommunity.com PowerCADD Forum - Ron Gillespie 08:01:14 4/16/2004 (0)
        
        Re: New DesignCommunity.com PowerCADD Forum - fjjRA 07:44:56 4/16/2004 (2)
        
        Re: New DesignCommunity.com PowerCADD Forum - fjjRA 10:48:00 4/16/2004 (1)
        
        Re: New DesignCommunity.com PowerCADD Forum - fjjRA 09:32:43 4/17/2004 (0)
        
        Re: New DesignCommunity.com PowerCADD Forum - Bill 23:02:51 4/15/2004 (1)
        
        Re: New DesignCommunity.com PowerCADD Forum - Rob Coolidge 19:55:13 4/16/2004 (0)
- Re: New DesignCommunity.com PowerCADD Forum - Ray Strang 02:45:49 4/14/2004 (0)
- Re: a special thanks - Bill Stanley 22:32:09 4/13/2004 (0)
- Re: New DesignCommunity.com PowerCADD Forum - GaryV 21:48:17 4/13/2004 (0)
- Re: New DesignCommunity.com PowerCADD Forum - Peter Baco t 21:24:30 4/13/2004 (0)
- Re: New DesignCommunity.com PowerCADD Forum - Matt 20:53:31 4/13/2004 (0)
hatching - joseph compton 09:21:49 4/13/2004 (6)
- Re: hatching - huc 10:26:55 4/13/2004 (0)
- Re: hatching - Michael Charek 09:38:40 4/13/2004 (4)
  - Re: hatching - joseph compton 10:55:35 4/13/2004 (2)
    - Re: hatching - Matt 11:30:33 4/13/2004 (1)
      - Re: hatching - Peter Baco t 11:53:07 4/13/2004 (0)
  - Re: hatching - joseph compton 10:04:05 4/13/2004 (0)
Best way to create soft - watercolor style renders - Jai 02:20:11 4/12/2004 (11)
- Re: Best way to PRINT - watercolor style renders - Rod Terry 08:27:44 4/12/2004 (6)
  - Re: Best way to PRINT - watercolor style renders - Michael Charek 08:39:26 4/13/2004 (0)
  - Re: Best way to PRINT - watercolor style renders - John Morse 12:36:29 4/12/2004 (4)
    - Re: Best way to PRINT - watercolor style renders - Rod Terry 14:04:12 4/12/2004 (3)
      - Re: Best way to PRINT - watercolor style renders - John Morse 06:38:45 4/13/2004 (1)
        
        Re: Best way to PRINT - watercolor style renders - huc 07:54:30 4/13/2004 (0)
      - Re: Best way to PRINT - watercolor style renders - John Morse 06:35:51 4/13/2004 (0)
- Re: Best way to create soft - watercolor style renders - Paul 08:13:56 4/12/2004 (0)
- Re: Best way to create soft - watercolor style renders - huc 08:03:25 4/12/2004 (1)
  - Re: Best way to create soft - watercolor style renders--thanks to all - Jai 15:56:27 4/12/2004 (0)
- Re: Best way to create soft - watercolor style renders - Michael Spencer 05:24:37 4/12/2004 (0)
Bug Report -DXF in & out- - Sukebe Daiou 01:58:27 4/11/2004 (0)
Example file with Sheets?? - Brandon 13:02:32 4/09/2004 (2)
- Re: Example file with Sheets?? - Steve Woolf 07:43:45 4/11/2004 (0)
- Re: Example file with Sheets?? - Matt Arnold 16:24:17 4/09/2004 (0)
PC7 wish list - Paolo Rossi 23:42:00 4/08/2004 (1)
- Re: PC7 wish list - herb 16:47:42 4/10/2004 (0)
create a hatch - adam rohaly 11:19:45 4/08/2004 (6)
- Re: create a hatch - John Morse 11:37:25 4/08/2004 (0)
- Re: create a hatch - Michael Charek 11:30:07 4/08/2004 (4)
  - Re: create a hatch - Michael Charek 11:32:34 4/08/2004 (3)
    - Re: create a hatch - adam 11:53:37 4/08/2004 (2)
      - Re: create a hatch - Matt Arnold 12:18:52 4/08/2004 (1)
        
        Re: create a hatch - Bill 12:57:26 4/08/2004 (0)
Design Event - Small Planet 11:05:39 4/08/2004 (1)
- Re: Design Event - Small Planet 11:07:39 4/08/2004 (0)
HP 9650 with G4 - David M 20:33:38 4/07/2004 (0)
OT: Web Conferencing - Leonard 14:29:41 4/07/2004 (8)
- Re: OT: Web Conferencing - Michael Spencer 04:47:23 4/08/2004 (2)
  - Re: OT: Web Conferencing - David Ross 22:22:23 4/08/2004 (1)
    - Re: OT: Web Conferencing - Leonard 17:50:34 4/09/2004 (0)
- Re: OT: Web Conferencing - Phil L o h e e d 16:02:59 4/07/2004 (4)
  - Re: OT: Web Conferencing - Leonard 17:02:48 4/07/2004 (3)
    - Re: OT: Web Conferencing - Jai 01:53:30 4/08/2004 (2)
      - Re: OT: Web Conferencing - Kevin Craft 06:42:33 4/08/2004 (1)
        
        Re: OT: Web Conferencing - Michael Spencer 04:34:44 4/10/2004 (0)
Electrical Symbols - Feedback Wanted - Alfred Scott 08:34:25 4/07/2004 (3)
- Re: Electrical Symbols - Feedback Wanted - Fred Weller 18:57:45 4/07/2004 (0)
- Re: Electrical Symbols - Feedback Wanted - John Morse 11:34:53 4/07/2004 (0)
- Re: Electrical Symbols - Feedback Wanted - Fran�ois Tribel 10:40:25 4/07/2004 (0)
Automating PDF Tranfers - Peter Drasnin 14:18:58 4/06/2004 (0)
PC7 wish list - Rod Terry 09:40:59 4/06/2004 (3)
- Re: PC 6 1/2 (?) wish list - Ramon Perez Gatell 09:03:03 4/07/2004 (0)
- Re: PC7 wish list - Erik Mar 11:00:08 4/06/2004 (0)
- Re: PC7 wish list: Larger Symbol Window - huc 10:26:48 4/06/2004 (0)
Neu Design - Ali Aptullah 15:04:28 4/05/2004 (0)
getting pdf to work in classic - Jason L o c h e r 12:55:43 4/05/2004 (0)
Preferences - Gerald 10:35:20 4/05/2004 (1)
- Re: Preferences - huc 11:00:03 4/05/2004 (0)
Move Points Tool, Feedback Wanted - Alfred Scott 08:07:26 4/05/2004 (13)
- Re: Move Points Tool, Feedback Wanted - Steve Woolf 12:22:03 4/07/2004 (0)
- Re: Move Points Tool, Feedback Wanted - Rob Coolidge 19:16:26 4/05/2004 (0)
- Re: Move Points Tool, Feedback Wanted - John Cruet 13:19:13 4/05/2004 (0)
- Re: Move Points Tool, Feedback Wanted - Peter Baco t 12:24:01 4/05/2004 (0)
- Re: Move Points Tool, Feedback Wanted - Andy Caldwell, AIA 10:56:29 4/05/2004 (4)
  - Re: Move Points Tool, Feedback Wanted - Peter Baco t 12:28:51 4/05/2004 (2)
    - Re: Move Points Tool, Feedback Wanted - John Cruet 08:38:27 4/06/2004 (0)
    - Re: Move Points Tool, Feedback Wanted - Rob Coolidge 18:52:16 4/05/2004 (0)
  - Re: Move Points Tool, Feedback Wanted - Alfred Scott 12:15:45 4/05/2004 (0)
- Re: Move Points Tool, Feedback Wanted - Gerald 10:32:18 4/05/2004 (0)
- Re: Move Points Tool, Feedback Wanted - huc 08:21:24 4/05/2004 (2)
  - Re: Move Points Tool, Feedback Wanted - Alfred Scott 08:56:31 4/05/2004 (1)
    - Re: Move Points Tool, Feedback Wanted - John Morse 09:13:58 4/05/2004 (0)
Hp 1220C and powercad2000 - Roberto 08:00:24 4/05/2004 (0)
commands crash, - Paul 22:46:48 4/04/2004 (27)
- Re: commands crash, No magic � fix the fonts - Bill 13:53:44 4/07/2004 (17)
  - Re: commands crash, No magic � fix the fonts - Paul 14:18:10 4/07/2004 (16)
    - Re: commands crash, No magic � fix the fonts - Bill 14:52:24 4/07/2004 (15)
      - Re: commands crash, No magic � fix the fonts - Paul 17:45:39 4/07/2004 (0)
      - Re: commands crash, No magic � fix the fonts located ... - Mr E 15:46:18 4/07/2004 (13)
        
        Re: commands crash, No magic � fix the fonts located ... - GaryV 21:05:19 4/07/2004 (11)
        
        Re: commands crash, No magic � fix the fonts located ... - Derek D 13:38:39 4/08/2004 (10)
        
        Re: commands crash, No magic � fix the fonts located ... - GaryV 20:54:55 4/08/2004 (9)
        
        Re: commands crash, No magic � fix the fonts located ... - GaryV 20:58:19 4/08/2004 (8)
        
        Re: commands crash, No magic � fix the fonts located ... - Derek D 21:43:09 4/08/2004 (7)
        
        Re: commands crash, No magic � fix the fonts located ... - Mr E 09:46:19 4/09/2004 (6)
        
        Re: commands crash, No magic � fix the fonts located ... - Derek D 18:08:21 4/09/2004 (1)
        
        Re: commands crash, No magic � fix the fonts located ... - Mr E 20:45:41 4/09/2004 (0)
        
        Re: commands crash, No magic � fix the fonts located ... - Matt Arnold 16:49:01 4/09/2004 (3)
        
        Re: FONTS update solution - update Suitcase X1 - Paul 23:09:29 4/10/2004 (2)
        
        Re: Thanks - update Suitcase X1 - Bill Stanley 10:32:02 4/12/2004 (1)
        
        Re: Thanks - update Suitcase X1 - Paul 12:32:21 4/12/2004 (0)
        
        Re: commands crash, No magic � fix the fonts located ... - Paul 17:45:03 4/07/2004 (0)
- Re: commands crash - cannot find - Bill 14:02:07 4/05/2004 (3)
  - Re: commands crash - cannot find - Paul Hinckley 18:41:18 4/05/2004 (2)
    - Re: commands crash - cannot find - Bill 11:58:36 4/06/2004 (1)
      - Re: commands crash - cannot find - Paul 16:24:38 4/06/2004 (0)
- Re: Fonts crash, - huc 06:44:24 4/05/2004 (1)
  - Re: Fonts crash, - Paul 08:37:46 4/05/2004 (0)
- Re: commands,crash - huc 06:37:59 4/05/2004 (0)
- Re: Snapping - huc 06:35:41 4/05/2004 (1)
  - Re: Snapping - Paul 08:00:39 4/05/2004 (0)
Dimension Text - Jay Killen 18:43:11 4/04/2004 (13)
- Re: Dimension Text - Bill 12:32:45 4/06/2004 (2)
  - Re: Dimension Text - Matt Arnold 12:50:10 4/06/2004 (1)
    - Re: Dimension Text - Bill 15:07:55 4/06/2004 (0)
- Re: Dimension Text - huc 06:48:46 4/05/2004 (0)
- Re: Dimension Text - Derek D 03:56:08 4/05/2004 (0)
- Re: Dimension Text - Matt Arnold 20:18:10 4/04/2004 (7)
  - Re: Dimension Text -- well almost - Matt Arnold 20:21:22 4/04/2004 (6)
    - Re: Dimension Text -- well almost - Alfred Scott 07:54:32 4/05/2004 (0)
    - Re: Dimension Text -- well almost - Matt Arnold 20:48:16 4/04/2004 (4)
      - Re: Dimension Text -- well almost - Jay Killen 22:32:07 4/04/2004 (3)
        
        Re: Dimension Text -- well almost - Matt Arnold 04:59:51 4/05/2004 (2)
        
        Re: Dimension Text -- well almost -- almost - Matt Arnold 06:30:50 4/05/2004 (1)
        
        Re: Dimension Text -- well almost -- almost -- also - Matt Arnold 06:55:11 4/05/2004 (0)
PowerCadd 7 Features - ETEaster 18:17:07 4/03/2004 (13)
- Re: PowerCadd 7 Features - Chris Roehl 12:20:15 4/05/2004 (10)
  - Re: PowerCadd 7 Features - Michael Charek 12:37:42 4/05/2004 (9)
    - Re: PowerCadd 7 Features - Chris Roehl 20:25:13 4/05/2004 (8)
      - Re: PowerCadd 7 Features - Michael Spencer 05:43:21 4/07/2004 (0)
      - Re: PowerCadd 7 Features - David Ross 04:52:12 4/06/2004 (6)
        
        Re: PowerCadd 7 Features - Chris Roehl 05:49:33 4/07/2004 (5)
        
        Re: PowerCadd 7 Features - Michael Charek 06:54:35 4/07/2004 (4)
        
        Re: PowerCadd 7 Features - Chris Roehl 07:20:28 4/07/2004 (3)
        
        Re: PowerCadd 7 Features - John Morse 07:43:07 4/07/2004 (2)
        
        Re: PowerCadd 7 Features - Chris Roehl 08:09:44 4/07/2004 (1)
        
        Re: PowerCadd 7 Features - Chris Roehl 14:31:17 4/12/2004 (0)
- Re: PowerCadd 7 Features - Michael Spencer 06:18:31 4/04/2004 (1)
  - Re: PowerCadd 7 Features - Ray Strang 05:55:38 4/05/2004 (0)
should I update to 7 - Dwight 13:28:05 4/03/2004 (2)
- Yes - Matt Arnold 15:20:38 4/03/2004 (1)
  - Re: Yes - Rob Coolidge 17:56:02 4/03/2004 (0)
Loading libraries - Jai 03:30:15 4/03/2004 (1)
- Re: Loading libraries - Michael Spencer 06:22:05 4/04/2004 (0)
PowerCADD 7 suggestions/requests - Erik Mar 18:44:05 4/02/2004 (2)
- Re: Loader - huc 21:17:57 4/02/2004 (1)
  - Re: Loader - Erik Mar 09:07:40 4/03/2004 (0)
PowerCADD 6 Expert ??? - Bob Sandkam 18:14:36 4/02/2004 (1)
- Re: PowerCADD 6 Expert ??? - huc 21:15:12 4/02/2004 (0)
Forum Search is Working - Derek D 10:09:21 4/02/2004 (0)
Hatch improvement - Paolo Rossi 00:19:03 4/02/2004 (6)
- Re: Hatch improvement - johnson 13:54:04 4/02/2004 (0)
- Re: Hatch improvement - Jeffrey Jakucyk 04:16:20 4/02/2004 (4)
  - Re: Hatch improvement - Ed Groh 06:39:18 4/02/2004 (3)
    - Re: Hatch improvement - John Morse 09:26:00 4/02/2004 (2)
      - Re: Hatch improvement - Nick 09:33:14 4/02/2004 (1)
        
        Re: Hatch improvement - Ed Groh 11:26:39 4/03/2004 (0)
. . . . the smell of graphite in the morning. - Jay Killen 18:01:19 4/01/2004 (8)
- Re: . . . . the smell of graphite in the morning. Good free (-ish) fonts here - Jai 19:44:08 4/06/2004 (0)
- Re: . . . . the smell of graphite in the morning. - lavardera 12:31:00 4/03/2004 (0)
- Re: . . . . the smell of graphite in the morning. - Peter Baco t 12:11:28 4/02/2004 (0)
- Re: . . . . the smell of graphite in the morning. - Nick 20:54:33 4/01/2004 (0)
- Re: . . . . the smell of graphite in the morning. - Rob Coolidge 18:48:31 4/01/2004 (3)
  - Re: . . . . the smell of graphite in the morning. - Bill 19:09:24 4/01/2004 (2)
    - Re: . . . . the smell of graphite in the morning. - Jay Killen 20:46:09 4/01/2004 (1)
      - Re: . . . . the smell of graphite 'Great Fonts' - Rod Terry 14:09:08 4/02/2004 (0)
OT: Thanks for responding to PLS1 inquiry - Robert Isaac 16:40:19 4/01/2004 (0)
corrupted file - Jason L o c h e r 16:31:43 4/01/2004 (2)
- Re: corrupted file - huc 16:58:27 4/01/2004 (1)
  - Re: corrupted file - Jason L o c h e r 17:28:09 4/01/2004 (0)
OSX Server - GaryV 12:57:14 4/01/2004 (13)
- Re: OSX Server - Chris Roehl 20:19:56 4/01/2004 (11)
  - Re: OSX Server - GaryV 21:55:44 4/01/2004 (10)
    - Re: OSX Server - David Ross 04:06:11 4/02/2004 (9)
      - Re: OSX Server - Andy Caldwell, AIA 05:51:31 4/02/2004 (8)
        
        Re: OSX Server - huc 06:54:20 4/02/2004 (7)
        
        Re: OSX Server - Andy Caldwell, AIA 07:40:38 4/02/2004 (6)
        
        Re: OSX Server - pocomoonshine 11:39:05 4/02/2004 (0)
        
        Re: OSX Server - David Ross 07:51:29 4/02/2004 (4)
        
        Re: OSX Server - Mountains or Molehills - Mr E 08:56:03 4/02/2004 (3)
        
        Re: OSX Server - Mountains or Molehills - Chris Roehl 17:47:13 4/03/2004 (0)
        
        Re: OSX Server - Mountains or Molehills - huc 10:19:26 4/02/2004 (1)
        
        Re: OSX Server - Mountains or Molehills - Kevin Craft 13:17:28 4/02/2004 (0)
- Re: OSX Server - Bo 15:50:21 4/01/2004 (0)
Screen Snap, Align To Perpendicular, Not Working in 6.0.9 - Byron Balogh 11:26:00 4/01/2004 (5)
- A Snap : Works for me - huc 13:30:41 4/01/2004 (1)
  - Re: A Snap : Works for me - Byron Balogh 13:44:05 4/01/2004 (0)
- Re: Align Snap in 6.09, Working OK - Mr E 12:30:37 4/01/2004 (2)
  - Re: Align Snap in 6.09, Working OK - The Tao of Ch. 2 13:49:26 4/01/2004 (1)
    - hurray - Sphenisciformes 15:01:12 4/01/2004 (0)
Making pdf with layers from PowerCADD - James 09:54:52 4/01/2004 (2)
- Re: Making pdf with layers from PowerCADD - huc 10:01:40 4/01/2004 (1)
  - Re: Making pdf with layers from PowerCADD - James 16:59:18 4/01/2004 (0)
New Mac OS X features at WWDC- Quartz & 2D graphics - Nick 08:51:25 4/01/2004 (13)
- Re: New Mac OS X features at WWDC- Quartz & 2D graphics - Bill 09:58:04 4/01/2004 (1)
  - Re: New Mac OS X features at WWDC- Quartz & 2D graphics - Bill 10:47:11 4/01/2004 (0)
- Re: New Mac OS X features at WWDC- Quartz & 2D graphics - Alfred Scott 09:08:26 4/01/2004 (10)
  - Re: New Mac OS X features at WWDC- Quartz & 2D graphics - Rob Munach 05:37:31 4/02/2004 (1)
    - Re: New Mac OS X features at WWDC- Quartz & 2D graphics - John Morse 07:52:45 4/05/2004 (0)
  - Re: New Mac OS X features at WWDC- Quartz & 2D graphics - Nick 09:24:06 4/01/2004 (7)
    - Re: New Mac OS X features at WWDC- Quartz & 2D graphics - Alfred Scott 10:17:24 4/01/2004 (6)
      - Re: New Mac OS X features at WWDC- Quartz & 2D graphics - Sphenisciformes 14:15:09 4/01/2004 (1)
        
        OT - Penguin - Paul Sweet 17:32:24 4/02/2004 (0)
      - Re: New Mac OS X features at WWDC- Quartz & 2D graphics - Bill Stanley 13:36:15 4/01/2004 (1)
        
        Re: New Mac OS X features at WWDC- Quartz & 2D graphics - lavardera 13:55:07 4/01/2004 (0)
      - Re: New Mac OS X features at WWDC- Quartz & 2D graphics - Phil L o h e e d 13:12:46 4/01/2004 (0)
      - Re: New Mac OS X features at WWDC- Quartz & 2D graphics - huc 10:59:28 4/01/2004 (0)
Long text with file translation - Kent 07:42:54 4/01/2004 (6)
- Re: Long text with file translation - Bill 08:35:01 4/01/2004 (5)
  - Re: Long text with file translation - Bill 16:21:52 4/02/2004 (1)
    - Re: Long text with file translation - Bill 16:31:16 4/02/2004 (0)
  - Re: Long text with file translation - Kent 09:29:05 4/01/2004 (2)
    - Re: Long text with file translation - Bill 09:52:20 4/01/2004 (1)
      - Re: Long text with file translation - Jonathan 10:45:38 4/01/2004 (0)
Request for Key Commands - Apply Move -x, +x, -y, +y - Steve Woolf 06:35:39 4/01/2004 (0)
Overview Window - Michael Spencer 04:38:38 4/01/2004 (6)
- Re: Overview Window - Fred Weller 07:29:24 4/01/2004 (4)
  - Re: Overview Window--did Jobs ruin PowerCADD? - peter Baco t 08:41:49 4/01/2004 (3)
    - Re: Overview Window--did Jobs ruin PowerCADD? - Nick 09:03:32 4/01/2004 (0)
    - Re: Overview Window--did Jobs ruin PowerCADD? - huc 08:53:57 4/01/2004 (1)
      - Re: Overview Window--future still looks bright - Peter Baco t 17:10:48 4/01/2004 (0)
- Re: Overview Window - Matt Arnold 05:28:58 4/01/2004 (0)
Squiggle tool, zoom etc. - Jai 01:28:15 4/01/2004 (1)
- Re: Squiggle tool, zoom etc. - Jai 01:36:20 4/01/2004 (0)
Camera Tool - Greg 15:31:32 3/31/2004 (3)
- Re: Camera Tool - Alfred Scott 07:30:26 4/01/2004 (0)
- Re: Camera Tool - Peter Carlsen 22:04:59 3/31/2004 (0)
- Re: Camera Tool - CJH 16:27:37 3/31/2004 (0)
Paint Bucket precision - Bill Stanley 13:24:53 3/31/2004 (11)
- Re: Paint Bucket precision - huc 08:39:05 4/01/2004 (0)
- Re: Paint Bucket precision - Michael Spencer 04:10:57 4/01/2004 (2)
  - Re: Paint Bucket precision - Bill 08:07:16 4/01/2004 (1)
    - Re: Paint Bucket precision - Michael Spencer 03:56:33 4/02/2004 (0)
- Re: Paint Bucket precision - peter Baco t 13:36:43 3/31/2004 (6)
  - Re: Paint Bucket precision - Bill 08:09:18 4/01/2004 (0)
  - Re: Paint Bucket precision - John Morse 13:55:06 3/31/2004 (4)
    - Re: Paint Bucket precision - Andy Caldwell 06:55:14 4/01/2004 (3)
      - Re: Paint Bucket precision - John Morse 08:25:26 4/01/2004 (0)
      - Re: Paint Bucket precision - Bill 08:04:25 4/01/2004 (1)
        
        Re: Paint Bucket precision - Frank Sandoval 12:16:40 4/02/2004 (0)
OT: PLS1 Distance Measuring Tool ? - Robert Isaac 07:02:56 3/31/2004 (6)
- Re: OT: PLS1 Distance Measuring Tool ? - Rob Coolidge 12:03:51 3/31/2004 (0)
- Re: OT: PLS1 Distance Measuring Tool ? - Ed Groh 11:48:10 3/31/2004 (0)
- Re: OT: PLS1 Distance Measuring Tool ? - rjpotter 09:35:22 3/31/2004 (1)
  - Re: OT: PLS1 Distance Measuring Tool ? - Nick 10:22:35 3/31/2004 (0)
- Re: OT: PLS1 Distance Measuring Tool ? - Joe Calabrese 08:12:30 3/31/2004 (0)
- Re: OT: PLS1 Distance Measuring Tool ? - Nick 07:17:15 3/31/2004 (0)
Cursor Offset When Editing Text - Rob Munach 05:14:41 3/31/2004 (6)
- Re: Cursor Offset When Editing Text - Michael Spencer 04:14:10 4/01/2004 (0)
- Re: Cursor Offset When Editing Text - GaryV 12:40:44 3/31/2004 (0)
- Re: Cursor Offset When Editing Text - John Morse 05:53:42 3/31/2004 (0)
- Re: Cursor Offset When Editing Text - John Morse 05:46:03 3/31/2004 (2)
  - Re: Cursor Offset When Editing Text - Rob Munach 02:51:28 4/01/2004 (1)
    - Re: Cursor Offset When Editing Text - John Morse 15:57:04 4/01/2004 (0)
OT: Hot Ride - Alfred Scott 12:47:19 3/30/2004 (9)
- Re: OT: Hot Ride - Alfred Scott 14:30:56 3/31/2004 (1)
  - Re: OT: Hot Ride Oops - Alfred Scott 14:33:31 3/31/2004 (0)
- Re: OT: Hot Ride - Mark Truitt 12:30:17 3/31/2004 (0)
- Re: OT: Hot Ride Link bad? - peter Baco t 11:57:08 3/31/2004 (3)
  - Re: OT: Hot Ride Link bad? - Tom Baker 12:56:50 3/31/2004 (2)
    - Re: OT: Hot Ride Link bad? - Mark Truitt 14:15:33 3/31/2004 (0)
    - Re: OT: Hot Ride Link bad? - David Ross 13:05:15 3/31/2004 (0)
- Re: OT: Hot Ride - Paul 16:32:23 3/30/2004 (1)
  - Re: OT: Hot Ride - Michael Charek 17:14:08 3/30/2004 (0)
Offset snap revisited - Rob Coolidge 08:03:38 3/30/2004 (17)
- Re: Offset snap revisited - Derek D 13:30:54 3/30/2004 (1)
  - Re: Offset snap revisited - Rob Coolidge 18:26:11 3/30/2004 (0)
- Re: Offset snap revisited - Jeff Bianco 13:25:26 3/30/2004 (3)
  - Re: Offset snap revisited - Bill 16:20:18 3/30/2004 (0)
  - Re: Offset snap revisited - peter Baco t 14:03:32 3/30/2004 (1)
    - Re: Offset snap revisited - huc 15:00:28 3/30/2004 (0)
- Re: Offset snap revisited - peter Baco t 11:07:54 3/30/2004 (0)
- Re: Offset snap revisited - Mr E 09:43:31 3/30/2004 (9)
  - Re: Offset snap revisited - Rob Coolidge 18:40:03 3/30/2004 (8)
    - Re: Offset snap revisited - Mr E 21:36:17 3/30/2004 (7)
      - Re: Offset snap revisited - peter Baco t 11:54:44 3/31/2004 (3)
        
        Re: Offset snap revisited - Mr E 12:30:32 3/31/2004 (0)
        
        Re: �Zoom Now� - Bill 12:26:33 3/31/2004 (1)
        
        Re: �Zoom Now� - peter Baco t 13:42:07 3/31/2004 (0)
      - Re: Offset snap revisited - John Morse 05:36:50 3/31/2004 (2)
        
        Re: Offset snap revisited - Mr E 08:44:58 3/31/2004 (0)
        
        Chapter 2 - huc 06:43:22 3/31/2004 (0)
One for Bill Stanley - rjpotter 06:53:12 3/30/2004 (5)
- Re: One for Bill Stanley - Bill 19:49:45 3/30/2004 (2)
  - Re: One for Bill Stanley - rjpotter 05:22:13 3/31/2004 (0)
  - Re: One for Bill Stanley - Mr E 21:45:52 3/30/2004 (0)
- Re: One for Bill Stanley - Derek D (not Bill) 13:09:25 3/30/2004 (1)
  - Re: One for Bill Stanley - rjpotter 03:25:22 3/31/2004 (0)
Repeatable WT Parallel Polygon crash - John Morse 06:50:26 3/30/2004 (2)
- Fixed - Alfred Scott 07:36:54 3/31/2004 (0)
- Re: Repeatable WT Parallel Polygon crash - Eduardo 15:55:28 3/30/2004 (0)
trash can replaces icon - Steve Graudin 06:39:51 3/30/2004 (1)
- Re: trash can replaces icon - rjpotter 06:50:39 3/30/2004 (0)
Velocity Engine - David M 18:43:29 3/29/2004 (11)
- Re: Velocity Engine - Mr E 19:08:38 3/29/2004 (10)
  - Re: Velocity Engine - David M 07:41:34 3/30/2004 (9)
    - Re: Velocity Engine - Mr E 09:55:43 3/30/2004 (5)
      - Re: Velocity Engine -> Alt Vec - David Ross 08:27:44 4/01/2004 (2)
        
        Re: Velocity Engine -> Alt Vec - Mr E 09:23:30 4/01/2004 (1)
        
        Re: Velocity Engine -> Alt Vec - David Ross 13:33:29 4/01/2004 (0)
      - Re: Velocity Engine - Sawtooth? - David M 10:28:00 3/30/2004 (0)
      - Re: Velocity Engine - David M 10:03:11 3/30/2004 (0)
    - Re: Velocity Engine - CJH 08:46:30 3/30/2004 (2)
      - Re: Velocity Engine - G4 is moot - David M 09:58:36 3/30/2004 (1)
        
        Re: Velocity Engine - G4 is moot - CJH 11:26:54 3/30/2004 (0)
what about a presentation window like on acad ? - Fran�ois Tribel 12:14:55 3/29/2004 (31)
- Re: what about a presentation window like on acad ? - Michael Spencer 04:36:01 3/30/2004 (24)
  - Re: what about a presentation window like on acad ? - Fran�ois Tribel 10:12:58 3/30/2004 (23)
    - Re: what about a presentation window like on acad ? - Michael Spencer 04:33:58 4/01/2004 (22)
      - Using Reference files on a large site - Matt 10:45:53 4/12/2004 (4)
        
        Re: Using Reference files on a large site - huc 11:42:08 4/12/2004 (2)
        
        Re: Using Reference files on a large site - Matt 11:49:13 4/12/2004 (1)
        
        Re: Using Reference files on a large site - huc 12:15:47 4/12/2004 (0)
        
        Re: Using Reference files on a large site - Fran�ois Tribel 11:06:48 4/12/2004 (0)
      - Re: what about a presentation window like on acad ? - Fran�ois Tribel 09:40:28 4/01/2004 (9)
        
        Re: what about a presentation window like on acad ? - huc 12:06:13 4/01/2004 (4)
        
        Re: what about a presentation window like on acad ? - Fran�ois Tribel 01:07:41 4/02/2004 (3)
        
        Re: what about a presentation window like on acad ? - huc 06:27:37 4/02/2004 (0)
        
        Re: what about a presentation window like on acad ? - Michael Spencer 04:04:52 4/02/2004 (1)
        
        Re: what about a presentation window like on acad ? - Fran�ois Tribel 04:45:47 4/03/2004 (0)
        
        Re: what about a presentation window like on acad ? - huc 10:23:52 4/01/2004 (3)
        
        Re: what about a presentation window like on acad ? - Fran�ois Tribel 00:56:31 4/02/2004 (2)
        
        Re: what about a presentation window like on acad ? - huc 06:17:36 4/02/2004 (1)
        
        Re: what about a presentation window like on acad ? - Michael Spencer 06:43:00 4/04/2004 (0)
      - Re: what about a presentation window like on acad ? - Rob Coolidge 07:44:00 4/01/2004 (6)
        
        Re: what about a presentation window like on acad ? - Michael Spencer 04:12:05 4/02/2004 (0)
        
        Re: what about a presentation window like on acad ? - fjjRA 08:06:42 4/01/2004 (4)
        
        PCD Ref's and DWG - huc 08:29:56 4/01/2004 (3)
        
        Re: PCD Ref's and DWG - fjjRA 09:14:23 4/01/2004 (2)
        
        Re: PCD Ref's and DWG - huc 09:24:59 4/01/2004 (1)
        
        Re: PCD Ref's and DWG - fjjRA 11:58:15 4/01/2004 (0)
- Re: what about a presentation window like on acad ? - huc 12:36:24 3/29/2004 (5)
  - Re: what about a presentation window like on acad ? - Fran�ois Tribel 10:28:46 3/30/2004 (4)
    - Re: what about a presentation window like on acad ? - Michael Spencer 04:35:15 4/01/2004 (3)
      - Re: what about a presentation window like on acad ? - fjjRA 05:57:58 4/01/2004 (2)
        
        Re: what about a presentation window like on acad ? - Michael Spencer 05:23:36 4/05/2004 (1)
        
        Re: what about a presentation window like on acad ? - Fran�ois Tribel 10:11:32 4/05/2004 (0)
G5 1.6 & PowerCadd - Jesse Thompson 10:58:58 3/29/2004 (1)
- Re: G5 1.6 & PowerCadd - Erik Mar 11:37:53 3/29/2004 (0)
Double clicking DWG in the finder - Bill Stanley 10:56:34 3/29/2004 (5)
- Re: Double clicking DWG in the finder - Matt Arnold 05:03:29 3/30/2004 (0)
- Re: Double clicking DWG - small possible clue - John Morse 11:00:38 3/29/2004 (3)
  - Re: Double clicking DWG - small possible clue - Ron Gillespie 08:32:41 3/30/2004 (2)
    - Re: Double clicking DWG - small possible clue - Michael Spencer 04:13:49 4/02/2004 (1)
      - Re: Double clicking DWG - small possible clue - Rob Coolidge 11:01:33 4/02/2004 (0)
Powercadd Basics II - Jay Killen 10:44:18 3/29/2004 (43)
- Re: Powercadd Basics II - peter Baco t 14:46:09 3/29/2004 (0)
- Re: Powercadd Basics II - Steve Woolf 13:42:16 3/29/2004 (1)
  - Re: Powercadd Basics II - Jay Killen 14:06:04 3/29/2004 (0)
- Re: Powercadd Basics II - Mr E 11:48:37 3/29/2004 (11)
  - Re: Powercadd Basics II - Jay Killen 12:10:09 3/30/2004 (10)
    - Re: Powercadd Basics II - Mr E 13:16:22 3/30/2004 (0)
    - Forum Hiccup - Jay Killen 12:23:01 3/30/2004 (8)
      - Re: Forum Hiccup - peter Baco t 17:15:32 3/30/2004 (7)
        
        Re: Forum Hiccup and the "N" key - Jay Killen 04:19:44 3/31/2004 (6)
        
        Re: Forum Hiccup and the "N" key - huc 06:22:41 3/31/2004 (1)
        
        zeroing cursor followup - huc 06:32:32 3/31/2004 (0)
        
        Re: Forum Hiccup and the "N" key - Michael Charek 05:35:33 3/31/2004 (3)
        
        Re: Forum Hiccup and the "N" key - Rob Coolidge 11:52:59 3/31/2004 (2)
        
        Re: Forum Hiccup and the "N" key - Bill 12:41:25 3/31/2004 (1)
        
        Re: Forum Hiccup and the "N" key - John Morse 14:45:41 3/31/2004 (0)
- Re: Powercadd Basics II - Michael Spencer 10:57:10 3/29/2004 (27)
  - Re: Powercadd Basics II - Ed Groh 12:24:07 3/29/2004 (0)
  - Re: Powercadd Basics II - Jay Killen 11:21:14 3/29/2004 (25)
    - Re: Powercadd Basics II - huc 12:50:29 3/29/2004 (19)
      - Re: Powercadd Basics II - Bill 13:34:22 3/29/2004 (18)
        
        Re: Powercadd Basics II - Derek D 15:34:31 3/29/2004 (0)
        
        Re: Powercadd Basics II - peter Baco t 15:00:56 3/29/2004 (0)
        
        Re: Powercadd Basics II - huc 14:54:40 3/29/2004 (0)
        
        Re: Powercadd Basics II - huc 14:42:57 3/29/2004 (2)
        
        Re: Powercadd Basics II - Bill 15:08:30 3/29/2004 (1)
        
        Re: Powercadd Basics II - Huc 15:38:51 3/29/2004 (0)
        
        Re: Powercadd Basics II - Mr E 13:51:10 3/29/2004 (3)
        
        Re: Powercadd Basics II - Bill 14:30:18 3/29/2004 (2)
        
        Re: Powercadd Basics II - Mr E 14:59:38 3/29/2004 (1)
        
        Re: Powercadd Basics II - Bill 15:12:03 3/29/2004 (0)
        
        Re: Powercadd Basics II - Matt Arnold 13:50:41 3/29/2004 (7)
        
        Re: Powercadd Basics II - Bill 14:22:36 3/29/2004 (6)
        
        Re: Powercadd Basics II - peter Baco t 15:25:57 3/29/2004 (5)
        
        Re: Powercadd Basics II woops - peter Baco t 15:27:03 3/29/2004 (4)
        
        Re: Powercadd Basics II woops - Mr E 16:04:27 3/29/2004 (3)
        
        Re: Powercadd Basics II woops - peter Baco t 16:29:52 3/29/2004 (1)
        
        Re: Powercadd Basics II woops - Mr E 19:20:52 3/29/2004 (0)
        
        Re: Powercadd Basics II woops - Bill 16:18:47 3/29/2004 (0)
    - Re: Powercadd Basics II - huc 12:31:07 3/29/2004 (2)
      - Powercadd and Job's attitude . . .. - Jay Killen 12:54:31 3/29/2004 (1)
        
        Re: Powercadd and Job's attitude . . .. - peter Baco t 15:06:55 3/29/2004 (0)
    - Re: Powercadd Basics II - Steve Woolf 11:50:04 3/29/2004 (1)
      - Re: Powercadd Picture - Jay Killen 12:19:29 3/29/2004 (0)
Our Forum Software - Alfred Scott 07:41:41 3/29/2004 (7)
- Re: Our Forum Software - Jai 20:34:33 3/29/2004 (3)
  - Re: Our Forum Software - John Cruet 14:11:47 3/31/2004 (2)
    - Re: Our Forum Software - Jai 15:04:56 4/06/2004 (0)
    - Re: Our Forum Software - Surf Rider 12:23:06 4/06/2004 (0)
- Re: Our Forum Software - lavardera 13:29:06 3/29/2004 (0)
- Re: Our Forum Software - Bob Sandkam 07:54:05 3/29/2004 (1)
  - Re: Our Forum Software - David Ross 08:52:08 3/29/2004 (0)
Powercadd Basics - Jay Killen 01:25:37 3/29/2004 (13)
- Don't forget Show Location! - Steve Woolf 10:21:24 3/29/2004 (0)
- Re: Powercadd Basics - huc 06:41:39 3/29/2004 (0)
- Re: Sorry Jay, I used the wrong name in reply :-p - Bob Sandkam 06:13:14 3/29/2004 (1)
  - Re: Sorry Jay, I used the wrong name in reply :-p - Jay Killen 10:49:39 3/29/2004 (0)
- Re: Powercadd Basics - Bob Sandkam 06:10:51 3/29/2004 (5)
  - Re: Powercadd Basics - Matt Arnold 06:20:20 3/29/2004 (4)
    - Re: Powercadd Basics - Bob Sandkam 07:49:16 3/29/2004 (3)
      - Re: Powercadd Basics - Matt Arnold 07:55:09 3/29/2004 (2)
        
        Re: Powercadd Basics - John Morse 10:52:59 3/29/2004 (1)
        
        Re: Powercadd Basics - Michael Spencer 11:02:36 3/29/2004 (0)
- Re: Powercadd Basics - Matt Arnold 04:44:17 3/29/2004 (2)
  - Whaaa? - Alfred Scott 07:14:42 3/29/2004 (1)
    - Re: Whaaa? - Matt Arnold 07:24:39 3/29/2004 (0)
Computer - Julia Sourray 12:21:24 3/28/2004 (1)
- Re: Computer - horg de 18:17:58 3/28/2004 (0)
importing an Excel plant list - Rebecca Reed 07:11:15 3/27/2004 (2)
- Re: importing an Excel plant list - huc 14:14:10 3/27/2004 (0)
- Re: importing an Excel plant list - Howard Partner 07:57:29 3/27/2004 (0)
Apple 20" iMac G4 - David M 10:22:46 3/26/2004 (7)
- Re: Apple 20" iMac G4 - Bob Sandkam 06:32:53 3/29/2004 (0)
- Re: Apple 20" iMac G4 - Thanks - David M 14:40:54 3/26/2004 (2)
  - Re: Apple 20" iMac G4 - Thanks - David Ross 03:23:20 3/27/2004 (1)
    - Re: Apple 20" iMac G4 - Thanks - David M 06:10:47 3/27/2004 (0)
- Re: Apple 20" iMac G4 - MAP 11:52:29 3/26/2004 (0)
- Re: Apple 20" iMac G4 - John Morse 11:23:36 3/26/2004 (0)
- Re: Apple 20" iMac G4 - rjpotter 11:06:25 3/26/2004 (0)
blurred lines display - Gaetano Marzani 09:01:59 3/26/2004 (1)
- Re: blurred lines display - rjpotter 11:10:06 3/26/2004 (0)
Switching File Servers - David Ross 07:47:49 3/26/2004 (4)
- Re: Switching File Servers - Michael Spencer 08:11:29 3/26/2004 (3)
  - Re: Switching File Servers - Erik Mar 10:42:51 3/26/2004 (0)
  - Re: Switching File Servers - David Ross 08:21:20 3/26/2004 (1)
    - Re: Switching File Servers - Michael Spencer 16:26:52 3/26/2004 (0)
Dimensions - rjpotter 07:08:47 3/26/2004 (0)
Job Opening for Landscape Architects - Michael Spencer 04:30:08 3/26/2004 (9)
- Re: Job Opening for Landscape Architects - Sabrina Turner 08:00:26 3/29/2004 (1)
  - Re: Job Opening for Landscape Architects - Michael Spencer 11:06:44 3/29/2004 (0)
- Re: Job Opening for Landscape Architects - Peter kreuk 10:31:56 3/26/2004 (1)
  - Re: Job Opening for Landscape Architects - Michael Spencer 05:27:54 4/05/2004 (0)
- Re: Job Opening for Landscape Architects - Triangle NC 05:24:04 3/26/2004 (4)
  - Re: Job Opening for Landscape Architects - Michael Spencer 07:02:35 3/26/2004 (3)
    - Re:Job Opening for Landscape Architects - Jai 13:29:58 4/05/2004 (2)
      - Re:Job Opening for Landscape Architects - Michael Spencer 05:33:09 4/06/2004 (1)
        
        Re:Job Opening for Landscape Architects - Jai 15:02:17 4/06/2004 (0)
Tab during resizing problem - Fred Weller 17:03:09 3/25/2004 (8)
- Re: Tab during resizing problem - Rob Coolidge 20:40:30 3/25/2004 (7)
  - Re: Tab during resizing problem - GaryV 21:18:26 3/25/2004 (6)
    - Re: Tab during resizing problem - Bill 23:00:41 3/25/2004 (5)
      - Re: Tab during resizing problem - fixed - Bill 09:46:31 4/01/2004 (2)
        
        Re: Tab during resizing problem - fixed - GaryV 12:33:44 4/01/2004 (1)
        
        Re: Tab during resizing problem - fixed - Bill 14:29:23 4/01/2004 (0)
      - Re: Tab during resizing problem - Michael Spencer 04:16:45 3/26/2004 (0)
      - Re: Tab during resizing problem - GaryV 23:05:16 3/25/2004 (0)
DWG writing (no error/a serious error) - Jonas 14:27:52 3/25/2004 (5)
- Re: DWG writing (no error/a serious error) - Bill 15:06:05 3/25/2004 (4)
  - Re: DWG writing (no error/a serious error) - jonas 15:21:58 3/25/2004 (3)
    - Re: DWG writing (no error/a serious error) - Bill 15:26:59 3/25/2004 (2)
      - Re: DWG writing (no error/a serious error) - Jeffrey Jakucyk 10:11:46 3/26/2004 (1)
        
        Re: DWG writing (no error/a serious error) - Bill 11:32:27 3/26/2004 (0)
dwg import defaults - Greg 13:32:55 3/25/2004 (6)
- Re: dwg import defaults - CJH 14:22:17 3/25/2004 (4)
  - Re: dwg import defaults - peter Baco t 13:58:48 3/26/2004 (2)
    - Re: dwg import defaults - Michael Spencer 05:35:11 3/29/2004 (1)
      - Re: dwg import defaults - peter Baco t 14:33:16 3/29/2004 (0)
  - Re: dwg import defaults - Matt Arnold 14:32:25 3/25/2004 (0)
- Re: dwg import defaults - Bill 14:07:19 3/25/2004 (0)
We have Cheap New most popular CAD/CAM/CFD/GIS/EDA/FEA/PCB Softs!! - www.software-3000.com 12:52:49 3/25/2004 (1)
- Re: We have Cheap New most popular CAD/CAM/CFD/GIS/EDA/FEA/PCB Softs!! - clyde or terresa morris 18:59:11 4/03/2004 (0)
which preference setting... - Michael Spencer 11:22:38 3/25/2004 (3)
- Re: which preference setting... - Ramon Perez Gatell 12:25:48 3/25/2004 (0)
- Re: which preference setting... - Ron Gillespie 11:33:42 3/25/2004 (1)
  - Re: which preference setting... - CJH 11:44:47 3/25/2004 (0)
Appleworks split screen mode - lavardera 09:30:51 3/25/2004 (2)
- Re: Appleworks split screen mode - David M 21:25:58 3/25/2004 (0)
- Re: Appleworks split screen mode - Bob Sandkam 10:20:45 3/25/2004 (0)
PowerCADD 6 Performance Answer - David M 08:18:42 3/25/2004 (11)
- Re: PowerCADD 6 Performance Answer - Dwight 07:35:13 3/26/2004 (0)
- The Repentant Naysayer's Clun - Michael Spencer 04:27:05 3/26/2004 (2)
  - Re: The Repentant Naysayer's Club - Michael Spencer 16:29:36 3/26/2004 (1)
    - Re: The Repentant Naysayer's Club - Daniel Webster 18:45:45 3/26/2004 (0)
- Re: PowerCADD 6 Performance Answer - Bill 22:44:40 3/25/2004 (1)
  - Re: PowerCADD 6 Performance Answer - David M 06:11:39 3/26/2004 (0)
- Re: PowerCADD 6 Performance Answer - Alfred Scott 15:02:48 3/25/2004 (1)
  - Re: PowerCADD 6 Performance Answer - David M 16:27:09 3/25/2004 (0)
- Zoom In/Out/Previouw Now - huc 10:01:45 3/25/2004 (2)
  - Re: Zoom In/Out/Previouw Now - David M 16:14:20 3/25/2004 (1)
    - Re: Zoom In/Out/Previouw Now - huc 23:03:51 3/25/2004 (0)
Re: Odd Wild Tools Bug & PowerDWG Bug! - Ron Gillespie 08:06:47 3/25/2004 (7)
- Re: Odd Wild Tools Bug & PowerDWG Bug! - Ron Gillespie 15:18:30 3/25/2004 (0)
- Re: Odd Wild Tools Bug & PowerDWG Bug! - Erik Mar 10:20:40 3/25/2004 (4)
  - Re: Odd Wild Tools Bug & PowerDWG Bug! - Bill 14:04:12 3/25/2004 (3)
    - Re: Odd Wild Tools Bug & PowerDWG Bug! - Matt Arnold 14:29:58 3/25/2004 (2)
      - Re: Odd Wild Tools Bug & PowerDWG Bug! - Bill 15:18:15 3/25/2004 (1)
        
        Re: Odd Wild Tools Bug & PowerDWG Bug! - Matt Arnold 15:43:06 3/25/2004 (0)
- Re: Odd Wild Tools Bug & PowerDWG Bug! - Rob Coolidge 08:59:43 3/25/2004 (0)
Seeking (outsourced) development Partners: Arkians Architects - Arkians Architects 22:43:52 3/24/2004 (2)
- Re: Seeking (outsourced) development Partners: Arkians Architects - frank fomah 02:30:46 3/26/2004 (0)
- Re: Seeking (outsourced) development Partners: Arkians Architects - MC 04:41:26 3/25/2004 (0)
dimension attributes in the edit window - Allan Ommerli 15:10:31 3/24/2004 (2)
- Re: dimension attributes in the edit window - Mark Truitt 21:12:33 3/25/2004 (1)
  - Re: dimension attributes in the edit window - Allan Ommerli 08:17:14 3/29/2004 (0)
Editing multiple dimensions - Rob Coolidge 20:21:21 3/23/2004 (2)
- Re: Editing multiple dimensions - Michael Spencer 03:30:12 3/24/2004 (1)
  - Re: Editing multiple dimensions - peter Baco t 10:51:12 3/24/2004 (0)
WT-Parallel offset tool-obscured drawing for snapping - Rob Coolidge 20:15:54 3/23/2004 (6)
- WT-Parallel offset tool-obscured drawing for snapping - Alfred Scott 13:15:18 3/28/2004 (0)
- Re: WT-Parallel offset tool-obscured drawing for snapping - Alfred Scott 14:55:14 3/25/2004 (2)
  - Re: WT-Parallel offset tool-obscured drawing for snapping - Rob Coolidge 20:31:00 3/25/2004 (1)
    - Your email - Alfred Scott 10:45:21 3/26/2004 (0)
- Re: WT-Parallel offset tool-obscured drawing for snapping - Michael Spencer 03:32:01 3/24/2004 (1)
  - Re: WT-Parallel offset tool-obscured drawing for snapping - John Cruet 16:34:56 3/24/2004 (0)
Move Window - ETEaster 19:39:23 3/23/2004 (1)
- Re: Move Window - Rob Coolidge 20:11:10 3/23/2004 (0)
Tab during resizing problem - Derek D 17:24:12 3/23/2004 (10)
- Re: Tab during resizing problem - Bill 14:37:48 3/25/2004 (5)
  - Re: Tab during resizing problem - Derek D 15:11:22 3/25/2004 (3)
    - Re: Tab during resizing problem - Derek D 16:01:30 3/25/2004 (0)
    - Re: Feature requests - Bill 15:22:44 3/25/2004 (1)
      - Re: Feature requests - Derek D 15:45:23 3/25/2004 (0)
  - Re: Tab during resizing problem - Bill 14:40:37 3/25/2004 (0)
- Re: Tab during resizing problem - Kevin Motyka 18:50:50 3/23/2004 (3)
  - Re: Tab during resizing problem - Bob Sandkam 16:50:37 3/24/2004 (2)
    - Re: Tab during resizing problem - Bill 14:30:49 3/25/2004 (0)
    - Re: Tab during resizing problem - Derek D 17:30:11 3/24/2004 (0)
The Selection Filter - John Cruet 14:30:23 3/23/2004 (3)
- Re: The Selection Filter - huc 14:57:29 3/23/2004 (0)
- Re: The Selection Filter - Matt Arnold 14:46:47 3/23/2004 (1)
  - Re: The Selection Filter - John Cruet 16:27:06 3/24/2004 (0)
Mouse trouble - mark 12:04:01 3/23/2004 (2)
- Re: Mouse trouble - CJH 12:10:35 3/23/2004 (1)
  - Re: Mouse trouble - mark 21:43:01 3/25/2004 (0)
Quartz Imaging - rjpotter 12:01:22 3/23/2004 (15)
- Re: Quartz Imaging - David M 08:38:20 3/25/2004 (0)
- Re: Quartz Imaging - rjpotter 13:59:24 3/23/2004 (0)
- Re: Quartz Imaging - John Morse 13:12:07 3/23/2004 (5)
  - Re: Quartz Imaging and screen resolution - David Scott 01:22:19 3/24/2004 (4)
    - Re: Quartz Imaging and screen resolution - Bo 03:21:49 3/24/2004 (3)
      - Re: Quartz Imaging and screen resolution - Matt Arnold 05:32:18 3/24/2004 (2)
        
        Re: Quartz Imaging and screen resolution - John Morse 10:31:26 3/24/2004 (1)
        
        Re: Quartz Imaging and screen resolution - peter Baco t 10:58:15 3/24/2004 (0)
- Re: Quartz Imaging - mark 12:26:41 3/23/2004 (0)
- Re: Quartz Imaging - CJH 12:12:07 3/23/2004 (5)
  - Re: Quartz Imaging - John Cruet 14:26:01 3/23/2004 (0)
  - Re: Quartz Imaging - Ron Gillespie 13:30:54 3/23/2004 (3)
    - Re: Quartz Imaging - David Ross 05:51:05 3/24/2004 (2)
      - Re: Quartz Imaging - CJH 10:13:19 3/24/2004 (1)
        
        Re: Quartz Imaging - ETEaster 05:59:29 3/25/2004 (0)
Mulitiple Scale Dimensioning Problems - MAP 11:47:23 3/23/2004 (4)
- Re: Mulitiple Scale Dimensioning Problems - Kent 08:14:32 3/24/2004 (0)
- Re: Mulitiple Scale Dimensioning Problems - Jeff Bianco 07:20:17 3/24/2004 (1)
  - Re: Mulitiple Scale Dimensioning Problems - MAP 09:58:38 3/24/2004 (0)
- Re: Mulitiple Scale Dimensioning Problems - John Morse 15:35:17 3/23/2004 (0)
Joining paint bucket groups - Frank Sandoval 07:24:31 3/23/2004 (5)
- Re: Joining paint bucket groups - Michael Spencer 03:51:30 3/24/2004 (0)
- Re: Joining paint bucket groups - Derek D 22:01:29 3/23/2004 (0)
- Re: Joining paint bucket groups - huc 08:30:47 3/23/2004 (0)
- Re: Joining paint bucket groups - Ed Groh 07:48:05 3/23/2004 (1)
  - Re: Joining paint bucket groups - Frank Sandoval 20:28:02 3/23/2004 (0)
truck and boat - Michael Spencer 15:43:31 3/22/2004 (7)
- Re: truck and boat - Ed Groh 18:27:14 3/22/2004 (6)
  - Re: truck and boat - Michael Spencer 04:50:25 3/23/2004 (5)
    - Re: truck and boat - David Ross 08:59:48 3/23/2004 (3)
      - Re: truck and boat - Michael Spencer 03:43:08 3/24/2004 (2)
        
        Re: truck and boat - Derek D 17:35:14 3/24/2004 (1)
        
        Re: truck and boat - Bill 13:24:10 3/25/2004 (0)
    - Re: truck and boat - Ed Groh 06:48:32 3/23/2004 (0)
Select Special... - Ed Groh 12:41:31 3/22/2004 (1)
- Re: Select Special... - Michael Spencer 16:55:19 3/22/2004 (0)
picking and snapping - Michael Spencer 06:42:59 3/22/2004 (1)
- Re: picking and snapping - Joel Kopitz 14:48:38 3/22/2004 (0)
Logs--do you use them? - Steve Woolf 20:21:05 3/21/2004 (17)
- Re: Logs--do you use them? YES - John Cruet 14:22:23 3/23/2004 (5)
  - Re: Logs--do you use them? MAYBE... - Ramon Perez Gatell 05:24:00 3/24/2004 (4)
    - refs - Michael Spencer 04:39:37 3/26/2004 (2)
      - Re: refs - Ramon Perez Gatell 09:02:51 3/26/2004 (0)
      - Re: refs - r d wease 05:35:56 3/26/2004 (0)
    - Re: Logs--do you use them? MAYBE... - John Cruet 16:30:16 3/24/2004 (0)
- Re: Logs--do you use them? NO. - Ramon Perez Gatell 10:30:20 3/23/2004 (3)
  - Re: Logs--do you use them? NO. - Michael Charek 11:06:22 3/23/2004 (2)
    - Re: Logs--do you use them? NO. - Ramon Perez Gatell 12:27:10 3/23/2004 (1)
      - Re: Logs--do you use them? NO. - Ramon Perez Gatell 11:29:12 3/25/2004 (0)
- Re: Logs--do you use them? - Phil L o h e e d 15:27:04 3/22/2004 (0)
- Re: Logs--do you use them? - Rob Coolidge 14:10:27 3/22/2004 (0)
- Re: Logs--do you use them? - Patrick Hansford 11:16:24 3/22/2004 (2)
  - Re: Logs--do you use them? - Michael Spencer 16:59:44 3/22/2004 (1)
    - Re: Logs--do you use them? - Patrick Hansford 05:55:46 3/23/2004 (0)
- Re: Logs--do you use them? - Michael Spencer 04:28:31 3/22/2004 (1)
  - Re: Logs--do you use them? - CJH 12:19:31 3/22/2004 (0)
Update Problem - john 14:15:53 3/21/2004 (6)
- Re: Update Problem - CJH 09:46:16 3/22/2004 (0)
- Re: Update Problem - huc 17:51:59 3/21/2004 (4)
  - Re: Update Problem - David Scott 01:06:02 3/22/2004 (0)
  - Re: Update Problem - GaryV 23:19:49 3/21/2004 (1)
    - Re: Update Problem - Rob Coolidge 14:16:20 3/22/2004 (0)
  - Re: Update Problem - Michael Charek 21:05:27 3/21/2004 (0)
store view - Michael Spencer 06:06:57 3/21/2004 (3)
- Re: store view - Rob Munach 02:31:16 3/22/2004 (0)
- Re: store view - Steve Woolf 07:29:21 3/21/2004 (1)
  - Re: store view - Michael Spencer 09:00:18 3/21/2004 (0)
Possible Training available in Phoenix, Az - Dan Washington 17:52:05 3/20/2004 (1)
- Re: Possible Training available in Phoenix, Az - Fred Weller 17:50:02 3/21/2004 (0)
Startup Checks and crashes w/ 10.3.3 - Billy 06:05:07 3/20/2004 (1)
- Re: Startup Checks and crashes w/ 10.3.3 - Michael Spencer 11:31:19 3/20/2004 (0)
Is this the way option dupicate works? - Jonathan 16:13:46 3/19/2004 (8)
- Re: Is this the way option dupicate works? - Bob Sandkam 02:38:44 3/23/2004 (5)
  - Re: Is this the way option dupicate works? - Rob Coolidge 19:53:04 3/23/2004 (4)
    - Re: Is this the way option dupicate works? - Michael Spencer 03:54:19 3/24/2004 (3)
      - Re: Is this the way option dupicate works? - Rob Coolidge 10:47:39 3/24/2004 (2)
        
        Re: Is this the way option dupicate works? - Michael Spencer 04:43:26 3/26/2004 (0)
        
        Re: Is this the way option dupicate works? - Rob Coolidge 11:03:22 3/24/2004 (0)
- Re: Is this the way option dupicate works? - Rob Coolidge 20:25:34 3/19/2004 (0)
- Re: Is this the way option dupicate works? - John Morse 16:58:19 3/19/2004 (0)
Stationery Quirk - xdavid 15:49:50 3/19/2004 (2)
- Re: Stationery Quirk - Paul Jensen 00:12:04 3/20/2004 (1)
  - Re: Stationery Quirk - xdavid 07:37:11 3/20/2004 (0)
PowerDWG - GaryV 17:26:00 3/18/2004 (1)
- Re: PowerDWG - CJH 18:40:26 3/18/2004 (0)
importing and manipulating photos in pcadd - dan the drafter 15:18:58 3/18/2004 (4)
- Re: importing and manipulating photos in pcadd - huc 16:33:08 3/18/2004 (3)
  - Re: importing and manipulating photos in pcadd - drafter dan 17:23:16 3/18/2004 (2)
    - Re: importing and manipulating photos in pcadd - huc 20:20:04 3/18/2004 (0)
    - Re: importing and manipulating photos in pcadd - Rob Coolidge 20:18:27 3/18/2004 (0)
Dimension edit dialog request - Paul Jensen 12:10:58 3/18/2004 (5)
- Re: yet another Dimension edit dialog request - John Cruet 17:15:10 3/18/2004 (0)
- Re: Dimension edit dialog request - huc 12:27:31 3/18/2004 (3)
  - Re: Dimension edit dialog request - Paul Jensen 12:51:15 3/18/2004 (2)
    - Re: Dimension edit dialog request - huc 13:06:57 3/18/2004 (1)
      - Re: Dimension edit dialog request - Paul Jensen 02:07:12 3/19/2004 (0)
Layer Palette Proposal - Bob Sandkam 09:49:21 3/18/2004 (2)
- Re: Layer Palette Proposal - Todd Stanley 00:17:59 3/21/2004 (0)
- Re: Layer Palette Proposal - Jonathan 19:00:26 3/18/2004 (0)
Contextual Menu Request - Bob Sandkam 09:39:58 3/18/2004 (16)
- Re: Contextual Menu Request - anyghing else? - Bill 22:14:00 3/22/2004 (0)
- Re: Contextual Menu Request - huc 11:34:43 3/18/2004 (14)
  - Re: Contextual Menu Request - CJH 08:45:46 3/19/2004 (11)
    - Re: Contextual Menu Request - Bill 16:20:17 3/19/2004 (10)
      - Re: Contextual Menu Request - CJH 17:41:35 3/19/2004 (9)
        
        Re: Contextual Menu Request - Blossoming cursor - Matt Arnold 18:50:17 3/19/2004 (8)
        
        Re: Contextual Menu Request - Blossoming cursor - Todd Stanley 00:24:22 3/21/2004 (3)
        
        Re: Contextual Menu Request - Blossoming cursor - Matt Arnold 02:17:27 3/21/2004 (2)
        
        Re: Contextual Menu Request - Blossoming cursor - Michael Spencer 04:36:04 3/21/2004 (1)
        
        Re: Contextual Menu Request - Blossoming cursor - Matt Arnold 06:40:06 3/21/2004 (0)
        
        Re: Contextual Menu Request - Blossoming cursor - Michael Spencer 04:25:55 3/20/2004 (3)
        
        Re: Contextual Menu Request - Blossoming cursor - CJH 08:53:42 3/20/2004 (2)
        
        Re: Contextual Menu Request - Blossoming cursor - Matt Arnold 11:45:03 3/21/2004 (0)
        
        Re: Contextual Menu Request - Blossoming cursor - Jeff Hassell 11:04:38 3/21/2004 (0)
  - Re: Contextual Menu Request - Rob Munach 08:36:15 3/19/2004 (1)
    - Re: Contextual Menu Request - Bob Sandkam 09:08:03 3/19/2004 (0)
A drawing method - Steve Woolf 08:19:31 3/18/2004 (25)
- Re: A drawing method - peter Baco t 12:57:31 3/19/2004 (0)
- Re: A drawing method - Rob Coolidge 20:08:39 3/18/2004 (2)
  - Re: A drawing method - peter Baco t 13:00:40 3/19/2004 (1)
    - Re: A drawing method - Rob Coolidge 20:07:02 3/19/2004 (0)
- Re: A drawing method - rotated rectangles improved - Jeff Bianco 14:24:24 3/18/2004 (8)
  - Re: A drawing method - rotated rectangles improved - Eduardo 16:28:42 3/18/2004 (0)
  - Re: A drawing method - rotated rectangles improved - Steve Woolf 16:13:43 3/18/2004 (6)
    - Re: A drawing method - rotated rectangles improved - Jeff Bianco 06:43:29 3/19/2004 (5)
      - Mixed results on height/width reporting - Stephen Woolf 08:22:16 3/19/2004 (4)
        
        Re: always ambiguous - Bill 15:25:10 3/19/2004 (3)
        
        Re: always ambiguous - Michael Spencer 04:28:25 3/20/2004 (0)
        
        Re: always ambiguous - Steve Woolf 16:54:32 3/19/2004 (1)
        
        Re: always ambiguous - Eduardo 17:38:32 3/19/2004 (0)
- Re: A drawing method - peter Baco t 13:02:02 3/18/2004 (0)
- Re: A drawing method - peter Baco t 12:59:04 3/18/2004 (0)
- Re: A drawing method - lavardera 11:10:25 3/18/2004 (0)
- Re: A drawing method - Rod Terry 09:56:56 3/18/2004 (4)
  - Re: A drawing method - Steve Woolf 10:07:51 3/18/2004 (3)
    - Re: A drawing method. ME TOO!! - Ramon Perez Gatell 05:15:33 3/19/2004 (2)
      - Flip and Mirror change rotated rectangles to polygons - Steve Woolf 05:49:31 3/19/2004 (1)
        
        Re: Flip and Mirror change rotated rectangles to polygons. Bummer... - Ramon Perez Gatell 10:49:47 3/19/2004 (0)
- Re: A drawing method - Patrick 09:18:18 3/18/2004 (1)
  - Nice workaround, but why? - Steve Woolf 11:13:55 3/18/2004 (0)
- Re: A drawing method - Robert Sandkam 09:12:06 3/18/2004 (0)
- Re: A drawing method - Matt Arnold 08:37:26 3/18/2004 (0)
DWG and PowerCADD extents - Bill Stanley 16:00:25 3/17/2004 (0)
Paint Bucket - Bill Stanley 15:17:03 3/17/2004 (28)
- Re: Paint Bucket - John Cruet 16:49:38 3/19/2004 (0)
- Re: Paint Bucket (Large Picture Example) - Jeffrey Jakucyk 08:54:52 3/18/2004 (5)
  - Re: Paint Bucket (Large Picture Example) - Matt Arnold 09:50:52 3/18/2004 (4)
    - Re: Paint Bucket (Large Picture Example) - Ramon Perez Gatell 05:22:16 3/19/2004 (2)
      - Re: Paint Bucket (Large Picture Example) - Matt Arnold 06:28:27 3/19/2004 (1)
        
        Re: Paint Bucket (Large Picture Example) - peter Baco t 09:33:31 3/22/2004 (0)
    - Re: Paint Bucket (Large Picture Example) - Michael Spencer 04:50:28 3/19/2004 (0)
- Re: Paint Bucket - patrick m a r r 07:37:04 3/18/2004 (0)
- Re: Paint Bucket - Andy Caldwell 07:12:10 3/18/2004 (0)
- Re: Paint Bucket - Paul Jensen 06:03:57 3/18/2004 (8)
  - Re: Paint Bucket - Bill 12:27:20 3/18/2004 (7)
    - Re: Paint Bucket - Jeffrey Jakucyk 13:29:41 3/18/2004 (6)
      - Re: Paint Bucket fill and Data External � a repair - Bill Stanley 08:51:00 3/19/2004 (0)
      - Re: Paint Bucket - Me too - Derek D 15:09:11 3/18/2004 (1)
        
        Re: Paint Bucket - Me too - Bill 15:58:58 3/18/2004 (0)
      - Re: Fills - Bill 13:48:34 3/18/2004 (1)
        
        Re: Fills - deserves serious attention - Bill 14:28:43 3/18/2004 (0)
      - Re: Paint Bucket - Paul Jensen 13:40:45 3/18/2004 (0)
- Re: Paint Bucket - Bill 20:21:53 3/17/2004 (1)
  - Re: Paint Bucket - huc 20:46:42 3/17/2004 (0)
- Re: Paint Bucket - huc 17:08:23 3/17/2004 (0)
- Re: Paint Bucket - Phil L o h e e d 16:35:53 3/17/2004 (6)
  - Re: Paint Bucket - Derek D 17:16:54 3/17/2004 (5)
    - Re: Paint Bucket - Jeffrey Jakucyk 18:28:21 3/17/2004 (4)
      - Re: Paint Bucket - huc 20:43:43 3/17/2004 (3)
        
        Re: Paint Bucket - Paolo Rossi 02:59:35 3/18/2004 (2)
        
        Re: Paint Bucket - huc 05:46:45 3/18/2004 (1)
        
        Re: Paint Bucket - Paolo Rossi 06:56:20 3/22/2004 (0)
GDT Softworks Plotter Adapter - BOB REED 12:30:24 3/17/2004 (3)
- Re: GDT Softworks Plotter Adapter - Jack Watson 06:20:26 3/23/2004 (0)
- Re: GDT Softworks Plotter Adapter - Patrick Hansford 10:05:22 3/18/2004 (0)
- Re: GDT Softworks Plotter Adapter - David Ross 22:39:12 3/17/2004 (0)
6.09 selecting - adam rohaly 11:32:09 3/17/2004 (4)
- Re: 6.09 selecting - huc 11:38:36 3/17/2004 (3)
  - Re: 6.09 selecting - adam rohaly 11:51:12 3/17/2004 (2)
    - Re: 6.09 selecting - huc 11:54:30 3/17/2004 (1)
      - Re: 6.09 selecting - David Scott 00:56:50 3/18/2004 (0)
Fine-Tuning WildTools - Alfred Scott 09:43:13 3/17/2004 (1)
- Re: Fine-Tuning WildTools - Ed Cundy 10:37:15 3/17/2004 (0)
Inconsistent Scale recognition - Jeff Bianco 13:37:27 3/16/2004 (9)
- Re: Inconsistent Scale recognition - huc 16:18:46 3/16/2004 (7)
  - Re: Inconsistent Scale recognition- updated to 6.09 - Jeff Bianco 06:11:29 3/17/2004 (0)
  - Re: Inconsistent Scale recognition - Rob Coolidge 18:59:30 3/16/2004 (5)
    - Re: Inconsistent Scale recognition - huc 20:05:38 3/16/2004 (4)
      - Re: Inconsistent Scale recognition - Rob Coolidge 10:39:15 3/17/2004 (3)
        
        Re: Inconsistent Scale recognition - huc 14:21:09 3/17/2004 (1)
        
        Re: Inconsistent Scale recognition - Rob Coolidge 19:42:35 3/17/2004 (0)
        
        Re: Inconsistent Scale recognition - huc 10:59:43 3/17/2004 (0)
- Re: Inconsistent Scale recognition - see 6.09 bugs below - Jeff Bianco 13:41:18 3/16/2004 (0)
6.0.9: select text bug and perpendicular snap - Bob B 09:56:10 3/16/2004 (3)
- 6.0.9: perpendicular snap - Alfred Scott 06:08:20 3/17/2004 (0)
- Re: 6.0.9: select text bug and perpendicular snap - David Scott 03:56:50 3/17/2004 (0)
- Re: 6.0.9: select text bug and perpendicular snap - huc 11:08:32 3/16/2004 (0)
Snap Settings - Robert Sandkam 09:42:26 3/16/2004 (3)
- Re: Snap Settings - huc 10:55:53 3/16/2004 (2)
  - Re: Snap Settings - Robert Sandkam 13:44:26 3/16/2004 (1)
    - Re: Snap Settings - huc 16:10:07 3/16/2004 (0)
import powerCADD files into Vector Works - Silvia 08:00:00 3/16/2004 (7)
- Re: import powerCADD files into Vector Works - fjjRA 08:45:38 3/16/2004 (2)
  - Re: import powerCADD files into Vector Works - Gustavo 14:53:44 3/17/2004 (1)
    - Re: import powerCADD files into Vector Works - fjjRA 06:13:03 3/18/2004 (0)
- Re: import powerCADD files into Vector Works - huc 08:10:41 3/16/2004 (3)
  - Re: import powerCADD files into Vector Works - Silvia 08:15:27 3/16/2004 (2)
    - Re: import powerCADD files into Vector Works - David Ross 22:44:57 3/17/2004 (0)
    - Re: import powerCADD files into Vector Works - Ramon Perez Gatell 20:13:42 3/16/2004 (0)
Need opinions please - Wade Stewart 05:35:39 3/16/2004 (0)
G4 is Dead (in PCD 6 world) - David M 23:45:18 3/15/2004 (11)
- Re: G4 is Dead (in PCD 6 world) - Michael Spencer 04:37:35 3/20/2004 (1)
  - Re: G4 is Dead (in PCD 6 world) - CJH 09:13:47 3/20/2004 (0)
- Re: G4 is Dead (in PCD 6 world) - Chris Roehl 07:49:06 3/17/2004 (8)
  - Re: G4 is Dead (in PCD 6 world) - David M 12:09:53 3/18/2004 (0)
  - Re: G4 is Dead (in PCD 6 world) - Ed Cundy 10:32:32 3/17/2004 (6)
    - Re: G4 is Dead (in PCD 6 world) - Chris Roehl 13:42:29 3/17/2004 (5)
      - G3 isn't dead yet in PCadd world - John Cruet 16:46:16 3/19/2004 (0)
      - Re: G4 is Dead (in PCD 6 world) - CJH 15:05:41 3/17/2004 (3)
        
        Re: G4 is Dead (in PCD 6 world) - CJH 17:21:47 3/17/2004 (2)
        
        Re: G4 is Dead (in PCD 6 world) - Derek D 18:35:32 3/17/2004 (1)
        
        Re: G4 is Dead (in PCD 6 world) - David Ross 22:43:15 3/17/2004 (0)
6.0.9 bug - David M 23:29:04 3/15/2004 (4)
- Re: 6.0.9 bug - Bill 16:15:02 3/16/2004 (0)
- Re: Another 6.0.9 bug - Rob Coolidge 07:00:14 3/16/2004 (2)
  - Re: Another 6.0.9 bug - huc 07:07:15 3/16/2004 (1)
    - Re: Another 6.0.9 bug - Rob Coolidge 08:43:16 3/16/2004 (0)
objects floating up: what am I doing wrong? - Michael Spencer 05:59:59 3/15/2004 (23)
- Re: objects floating up: what am I doing wrong? - huc 06:28:49 3/15/2004 (22)
  - Re: objects floating up: what am I doing wrong? - Michael Spencer 06:35:45 3/15/2004 (21)
    - Re: objects floating up: Borrowed humor - Bill 08:41:53 3/15/2004 (1)
      - Re: objects floating up: Borrowed humor - Bill 08:43:03 3/15/2004 (0)
    - Re: objects floating up: what am I doing wrong? - huc 08:14:41 3/15/2004 (18)
      - Re: objects floating up: what am I doing wrong? - Michael Spencer 03:47:12 3/16/2004 (0)
      - Re: select and contents disappear - Bill 09:00:37 3/15/2004 (16)
        
        Re: select and contents disappear - huc 12:40:29 3/15/2004 (7)
        
        Re: select and disappear is alarming - Bill 13:44:11 3/15/2004 (6)
        
        Re: select and disappear is alarming - Michael Spencer 03:54:40 3/16/2004 (4)
        
        yikes - Michael Spencer 03:57:46 3/16/2004 (3)
        
        Re: yikes - Matt Arnold 06:24:52 3/16/2004 (2)
        
        Re: yikes - Michael Spencer 04:35:08 3/17/2004 (1)
        
        Re: yikes - Derek D 05:11:37 3/17/2004 (0)
        
        Re: select and disappear is alarming - huc 14:09:08 3/15/2004 (0)
        
        Re: select and contents disappear - Derek D 12:37:30 3/15/2004 (2)
        
        Re: select and contents disappear - Bill 13:32:54 3/15/2004 (0)
        
        Re: select and contents disappear - huc 12:56:14 3/15/2004 (0)
        
        Re: select and contents disappear - Erik Mar 12:07:30 3/15/2004 (2)
        
        Re: select and contents disappear - Bill 13:29:36 3/15/2004 (1)
        
        Re: select and contents disappear - Erik Mar 16:28:56 3/15/2004 (0)
        
        Re: select and contents disappear - huc 09:13:52 3/15/2004 (1)
        
        Re: select and contents disappear - patrick m a r r 09:58:09 3/15/2004 (0)
PowerCadd in San Francisco - David Brown 08:39:16 3/14/2004 (4)
- Re: PowerCadd in San Francisco - Rob Coolidge 18:47:46 3/14/2004 (0)
- Re: PowerCadd in San Francisco - GaryV 10:51:02 3/14/2004 (2)
  - Re: PowerCadd in San Francisco - Bo 16:15:58 3/14/2004 (1)
    - Re: PowerCadd in San Francisco - GaryV 22:17:43 3/14/2004 (0)
lost overview - safisher 20:56:02 3/13/2004 (0)
Powercadd 6 Crash - Kim Vera Cruz 20:44:44 3/13/2004 (5)
- Re: Powercadd 6 Crash - Chris Roehl 15:40:58 3/14/2004 (1)
  - Re: Powercadd 6 Crash - Matt Arnold 16:05:12 3/14/2004 (0)
- Re: Powercadd 6 Crash - GaryV 21:41:00 3/13/2004 (0)
- Re: Powercadd 6 Crash - MLSherrod 21:20:40 3/13/2004 (1)
  - Re: Powercadd 6 Crash - Matt Arnold 06:08:12 3/14/2004 (0)
Cut with Line - Rolando 16:25:59 3/13/2004 (0)
A petty but accurate observation - GaryV 19:47:54 3/12/2004 (4)
- Re: A petty but accurate observation - Michael Spencer 05:04:10 3/13/2004 (3)
  - Re: A petty but accurate observation - Dave Z 08:29:21 3/13/2004 (2)
    - Re: A petty but accurate observation - GaryV 10:32:15 3/13/2004 (1)
      - Re: A petty but accurate observation - Matt Arnold 18:08:54 3/13/2004 (0)
DWG translater and Excel - Brad Miller 16:21:43 3/12/2004 (4)
- Re: DWG translater and Excel - Jai 09:30:22 3/13/2004 (0)
- Re: DWG translater and Excel - huc 16:45:17 3/12/2004 (2)
  - Re: DWG translater and Excel - Phil L o h e e d 14:49:01 3/14/2004 (1)
    - Re: DWG translater and Excel - huc 22:14:56 3/14/2004 (0)
an aside: Whose spell checker is this? - peter Baco t 15:14:56 3/12/2004 (3)
- Re: an aside: Whose spell checker is this? - lavardera 19:25:56 3/12/2004 (2)
  - Re: an aside: Whose spell checker is this? - Michael Spencer 04:59:38 3/14/2004 (1)
    - Re: an aside: Whose spell checker is this? - lavardera 10:50:19 3/14/2004 (0)
PowerCADD update snappier, but live select? - lavardera 13:33:24 3/12/2004 (0)
BEFORE you Upgrade PowerCADD! - Derek D 17:11:05 3/11/2004 (4)
- Re: BEFORE you Upgrade PowerCADD! - John Cruet 14:38:28 3/13/2004 (0)
- Re: BEFORE you Upgrade PowerCADD! - Derek D 01:05:12 3/12/2004 (2)
  - Re: BEFORE you Upgrade PowerCADD! - CJH 08:29:37 3/12/2004 (0)
  - Re: BEFORE you Upgrade PowerCADD! - Alfred Scott 06:24:36 3/12/2004 (0)
PowerCADD Preference Utility Users - NOTE - Derek D 17:03:58 3/11/2004 (1)
- Re: PowerCADD Preference Utility Users - NOTE - Bill 20:54:20 3/11/2004 (0)
PowerCADD 6.0.9 and WildTools 7.0.9 - Alfred Scott 15:58:57 3/11/2004 (10)
- Re: PowerCADD 6.0.9 and WildTools 7.0.9 - John Cruet 14:37:20 3/13/2004 (0)
- Re: PowerCADD 6.0.9 and WildTools 7.0.9 - Michael Spencer 15:29:28 3/12/2004 (0)
- Re: PowerCADD 6.0.9 and WildTools 7.0.9 - cursor problem remains - Ralph Richards 12:40:44 3/12/2004 (1)
  - Re: PowerCADD 6.0.9 and WildTools 7.0.9 - cursor problem remains - Matt Arnold 12:59:24 3/12/2004 (0)
- Re: PowerCADD 6.0.9 and WildTools 7.0.9 - Ralph Richards 08:04:54 3/12/2004 (1)
  - Re: PowerCADD 6.0.9 and WildTools 7.0.9 - Bill 08:14:56 3/12/2004 (0)
- Re: PowerCADD 6.0.9 - Release Notes! - Ed Groh 07:25:30 3/12/2004 (1)
  - Re: PowerCADD 6.0.9 - Release Notes! - CJH 08:33:55 3/12/2004 (0)
- Re: PowerCADD 6.0.9 and WildTools 7.0.9 - CJH 23:06:35 3/11/2004 (0)
- Re: PowerCADD 6.0.9 and WildTools 7.0.9 - Byron Balogh 18:19:06 3/11/2004 (0)
postage stamps - Michael Spencer 13:27:07 3/11/2004 (1)
- Re: postage stamps - Bill 14:17:04 3/11/2004 (0)
crash-inducing behavior to try - John Morse 09:24:55 3/11/2004 (6)
- Re: crash-inducing behavior to try - Todd Stanley 14:53:45 3/15/2004 (0)
- Re: crash-inducing behavior to try - Alfred Scott 07:06:03 3/12/2004 (0)
- Re: crash-inducing behavior to try - Bill 21:06:52 3/11/2004 (1)
  - Re: crash-inducing behavior to try - John Morse 06:31:13 3/12/2004 (0)
- Re: crash-inducing behavior to try - Derek D 12:13:44 3/11/2004 (0)
- Re: crash-inducing behavior to try - Jeffrey Jakucyk 10:28:58 3/11/2004 (0)
How's the Fix for Dashed Lines in Ref. Files Going? - Jeffrey Jakucyk 05:27:29 3/11/2004 (0)
PowerCADD vs VectorWorks - Greg 05:14:32 3/11/2004 (6)
- Re: PowerCADD vs VectorWorks - David Ross 20:14:03 3/11/2004 (0)
- Re: PowerCADD vs VectorWorks - Michael Spencer 14:15:46 3/11/2004 (3)
  - Re: PowerCADD vs VectorWorks - Greg 20:24:49 3/11/2004 (2)
    - Re: PowerCADD vs VectorWorks - fjjRA 06:00:01 3/12/2004 (1)
      - Re: PowerCADD vs VectorWorks - John Cruet 11:39:42 3/15/2004 (0)
- Re: PowerCADD vs VectorWorks - fjjRA 06:08:34 3/11/2004 (0)
PowerCADD and SketchUp - Iain Stewart 01:52:25 3/11/2004 (27)
- Re: PowerCADD and SketchUp - Joe Calabrese 10:35:11 3/13/2004 (0)
- Re: PowerCADD and SketchUp - Nick 07:52:38 3/13/2004 (2)
  - Re: PowerCADD and SketchUp - Robert Sandkam 17:45:03 3/13/2004 (0)
  - Re: PowerCADD and SketchUp - huc 10:21:22 3/13/2004 (0)
- Re: PowerCADD and SketchUp - Andy Caldwell, AIA 12:45:41 3/11/2004 (12)
  - Re: PowerCADD and SketchUp - Rob Coolidge 21:09:02 3/11/2004 (11)
    - Re: PowerCADD and SketchUp - Bill 08:09:17 3/12/2004 (10)
      - Re: PowerCADD and SketchUp - Robert Sandkam 10:10:43 3/12/2004 (9)
        
        Re: PowerCADD and SketchUp - Bill 08:15:12 3/15/2004 (2)
        
        Re: PowerCADD and SketchUp - Rob Coolidge 19:50:48 3/15/2004 (1)
        
        Re: PowerCADD and SketchUp - Bill 21:31:28 3/15/2004 (0)
        
        Re: PowerCADD and SketchUp - Rob Coolidge 18:35:12 3/13/2004 (5)
        
        Re: PowerCADD and SketchUp - fjjRA 06:36:45 3/15/2004 (4)
        
        Re: PowerCADD and SketchUp - Rob Coolidge 19:56:29 3/15/2004 (3)
        
        Re: PowerCADD and SketchUp - fjjRA 06:07:51 3/16/2004 (2)
        
        Re: PowerCADD and SketchUp - Rob Coolidge 09:16:03 3/16/2004 (1)
        
        Re: PowerCADD and SketchUp - fjjRA 12:08:56 3/16/2004 (0)
- Re: PowerCADD and SketchUp - Robert Sandkam 06:42:58 3/11/2004 (9)
  - Re: PowerCADD and SketchUp - Iain Stewart 09:52:37 3/11/2004 (8)
    - Re: PowerCADD and SketchUp (ArchiCAD URL) - Robert Sandkam 17:30:04 3/11/2004 (0)
    - Re: PowerCADD and SketchUp - Robert Sandkam 17:26:55 3/11/2004 (1)
      - Re: PowerCADD and SketchUp - Iain Stewart 01:01:51 3/13/2004 (0)
    - Re: PowerCADD and SketchUp - Patrick 11:31:23 3/11/2004 (4)
      - Re: PowerCADD and SketchUp - Robert Sandkam 16:42:59 3/11/2004 (3)
        
        Re: PowerCADD and SketchUp - Alfred Scott 07:11:06 3/12/2004 (0)
        
        Re: PowerCADD and SketchUp - fjjRA 06:02:52 3/12/2004 (0)
        
        Re: PowerCADD and SketchUp - Phil L o h e e d 17:24:46 3/11/2004 (0)
"clipping" for AutoCAD translation - peter Baco t 11:37:11 3/10/2004 (0)
Paint bucket tool not working correctly - Randy Roseberry 10:43:52 3/10/2004 (2)
- Re: Paint bucket tool not working correctly - Bill 13:55:08 3/10/2004 (0)
- Re: Paint bucket tool not working correctly - John Morse 11:20:47 3/10/2004 (0)
Placement of edit and other windows - Rod Terry 10:42:34 3/10/2004 (0)
New Features/Capabilites Requested for PowerCADD Layers - Byron Balogh 06:41:36 3/10/2004 (36)
- Re: Features/Capabilities for Layers - any other suggestions? - Bill 22:20:27 3/22/2004 (0)
- Re: New Features/Capabilites Requested for PowerCADD Layers - Michael McCabe 10:36:15 3/11/2004 (1)
  - Re: New Features/Capabilites Requested for PowerCADD Layers - huc 12:33:25 3/11/2004 (0)
- Re: New Features/Capabilites Requested for PowerCADD Layers - Rob Coolidge 19:16:48 3/10/2004 (1)
  - Re: New Features/Capabilites Requested for PowerCADD Layers - Bill 22:22:42 3/10/2004 (0)
- Re: New Features/Capabilites Requested for PowerCADD Layers - Bill 15:25:40 3/10/2004 (7)
  - Re: New Features/Capabilites Requested for PowerCADD Layers - Byron Balogh 16:37:27 3/10/2004 (6)
    - Clarification: Filtering the Layers - Byron Balogh 10:52:24 3/11/2004 (5)
      - Re: Clarification: Filtering the Layers - Bill 12:28:33 3/11/2004 (4)
        
        Re: Clarification: Filtering the Layers - Byron Balogh 13:27:26 3/11/2004 (3)
        
        Re: Clarification: Filtering the Layers - Bill 14:33:25 3/11/2004 (2)
        
        Re: Clarification: Filtering the Layers - huc 14:43:36 3/11/2004 (1)
        
        Re: Clarification: Filtering the Layers - Bill 15:24:23 3/11/2004 (0)
- Re: New Features/Capabilites Requested for PowerCADD Layers - Kevin Motyka 14:29:09 3/10/2004 (0)
- Re: New Features/Capabilites Requested for PowerCADD Layers - Rod Terry 10:49:28 3/10/2004 (1)
  - Re: New Features/Capabilites Requested for PowerCADD Layers - Byron Balogh 11:08:47 3/10/2004 (0)
- Re: New Features/Capabilites Requested for PowerCADD Layers - MLSherrod 10:40:52 3/10/2004 (5)
  - Re: New Features/Capabilites Requested for PowerCADD Layers - Bill 14:29:38 3/10/2004 (0)
  - Re: New Features/Capabilites Requested for PowerCADD Layers - huc 12:51:29 3/10/2004 (3)
    - Re: New Features/Capabilites Requested for PowerCADD Layers - MLSherrod 05:44:33 3/11/2004 (2)
      - Re: New Features/Capabilites Requested for PowerCADD Layers - Bill 09:56:04 3/11/2004 (1)
        
        Re: New Features/Capabilites Requested for PowerCADD Layers - MLSherrod 10:21:31 3/12/2004 (0)
- Re: New Features/Capabilites Requested for PowerCADD Layers - Jason L o c h e r 10:35:55 3/10/2004 (1)
  - Re: New Features/Capabilites Requested for PowerCADD Layers - peter Baco t 11:30:52 3/10/2004 (0)
- Re: New Features/Capabilites Requested for PowerCADD Layers - peter Baco t 09:36:52 3/10/2004 (0)
- Re: New Features/Capabilites Requested for PowerCADD Layers - Martin 09:16:50 3/10/2004 (0)
- Re: New Features/Capabilites Requested for PowerCADD Layers - Bo 08:10:45 3/10/2004 (2)
  - Re: New Features/Capabilites Requested for PowerCADD Layers - Bill 14:44:37 3/10/2004 (1)
    - Re: New Features/Capabilites Requested for PowerCADD Layers - Rob Coolidge 19:01:45 3/10/2004 (0)
- Re: New Features/Capabilites Requested for PowerCADD Layers - ETEaster 07:14:25 3/10/2004 (6)
  - Re: New Features/Capabilites Requested for PowerCADD Layers - Erik Mar 12:15:50 3/10/2004 (0)
  - Re: New Features/Capabilites Requested for PowerCADD Layers - randy Roseberry 10:56:46 3/10/2004 (4)
    - Re: New Features/Capabilites Requested for PowerCADD Layers - Rob Coolidge 18:57:35 3/10/2004 (0)
    - Re: New Features/Capabilites Requested for PowerCADD Layers - Bill 14:38:38 3/10/2004 (0)
    - Re: New Features/Capabilites Requested for PowerCADD Layers - huc 12:53:15 3/10/2004 (0)
    - Re: New Features/Capabilites Requested for PowerCADD Layers - John Morse 11:18:55 3/10/2004 (0)
PowerCADD Pref. Utility - Feedback request. - Derek D 00:54:25 3/10/2004 (2)
- Re: PowerCADD Pref. Utility - Feedback request. - ETEaster 07:16:18 3/10/2004 (1)
  - Re: PowerCADD Pref. Utility - Feedback request. - Bill 10:00:13 3/11/2004 (0)
To the FORUM HOST: Search not hitting the archives - Derek D 22:39:15 3/09/2004 (0)
designjet 500ps and OS10.3.2 - Randy Shanks 12:58:50 3/09/2004 (0)
OT: X-rip question - Patrick Hansford 06:54:07 3/09/2004 (2)
- Re: OT: X-rip question - Eduardo 08:56:21 3/09/2004 (1)
  - Re: OT: X-rip question - Patrick Hansford 09:45:54 3/09/2004 (0)
Frustrated PowerCADD Crashes - DO 14:51:43 3/08/2004 (2)
- Re: Frustrated PowerCADD Crashes - CJH 18:04:30 3/08/2004 (0)
- Re: Suggestion - Bill Stanley 16:09:36 3/08/2004 (0)
page setup for 1055cm - Bill Gore 11:53:34 3/08/2004 (16)
- Re: page setup for 1055cm - David Ross 19:44:02 3/08/2004 (3)
  - Re: page setup for 1055cm - David Ross 11:38:18 3/10/2004 (2)
    - Re: page setup for 1055cm - BILL GORE 08:52:55 3/11/2004 (1)
      - Re: page setup for 1055cm - David Ross 20:08:31 3/11/2004 (0)
- Re: page setup for 1055cm - Matt Arnold 11:56:15 3/08/2004 (11)
  - Re: page setup for 1055cm - Bill Gore 14:09:04 3/08/2004 (10)
    - Re: page setup for 1055cm - Matt Arnold 14:19:05 3/08/2004 (9)
      - Re: page setup for 1055cm - bill gore 14:32:41 3/08/2004 (8)
        
        Re: page setup for 1055cm - Matt Arnold 14:36:22 3/08/2004 (7)
        
        Re: page setup for 1055cm - bill gore 14:42:53 3/08/2004 (6)
        
        Re: page setup for 1055cm - Matt Arnold 14:48:50 3/08/2004 (5)
        
        Re: page setup for 1055cm - Bill gore 15:08:23 3/08/2004 (4)
        
        Re: page setup for 1055cm - Phil L o h e e d 15:41:41 3/08/2004 (3)
        
        Re: page setup for 1055cm - David Ross 07:49:16 3/09/2004 (0)
        
        Re: page setup for 1055cm - Michael Spencer 05:07:59 3/09/2004 (1)
        
        Re: page setup for 1055cm - Michael Spencer 05:08:58 3/09/2004 (0)
Opacity of fills - Brad Miller 11:29:06 3/08/2004 (1)
- Re: Opacity of fills - John Morse 12:10:03 3/08/2004 (0)
Paint bucket tool not working correctly - Randy Roseberry 11:06:04 3/08/2004 (1)
- Re: Paint bucket tool not working correctly - Paul Jensen 11:45:40 3/08/2004 (0)
dis-able the 'area of a complex polygon may not be correct' message - golfarch 09:28:56 3/08/2004 (2)
- Re: dis-able the 'area of a complex polygon may not be correct' message - Matt Arnold 10:09:12 3/08/2004 (1)
  - Re: dis-able the 'area of a complex polygon may not be correct' message - golfarch 10:25:47 3/08/2004 (0)
Lotion for Rosacea, Eczema, and Psoriasis. Soft-E-Lotion - JH 07:56:11 3/07/2004 (2)
- Lotion for Rosacea, Eczema, and Psoriasis. Soft-E-Lotion - JH 10:34:41 3/20/2004 (0)
- Better than Bath and Body Works Lotion. Soft-E-Lotion - JH 15:14:11 3/09/2004 (0)
HP 9650 - Daniel Lajoie 11:16:14 3/06/2004 (1)
- Re: HP 9650 - Rob 13:45:49 3/23/2004 (0)
PDF & fill - T om D. 12:31:02 3/05/2004 (3)
- Re: PDF & fill - Bill 13:39:23 3/05/2004 (1)
  - Re: PDF & fill - CJH 16:47:56 3/05/2004 (0)
- Re: PDF & fill - peter Baco t 12:55:56 3/05/2004 (0)
PC6- Carbon or Cocoa - Rob Munach 07:36:39 3/05/2004 (19)
- Re: PC6- Carbon or Cocoa - Chris Roehl 12:50:55 3/06/2004 (7)
  - Re: PC6- Carbon or Cocoa - Michael Spencer 05:37:24 3/07/2004 (6)
    - Re: PC6- Carbon or Cocoa - Chris Roehl 06:36:13 3/08/2004 (5)
      - Re: PC6- Carbon or Cocoa - Alfred Scott 07:55:12 3/08/2004 (2)
        
        Re: PC6- Carbon or Cocoa - Michael Spencer 05:22:42 3/09/2004 (1)
        
        Re: PC6- Carbon or Cocoa - CJH 09:49:36 3/09/2004 (0)
      - Re: PC6- Carbon or Cocoa - huc 07:38:15 3/08/2004 (1)
        
        Re: PC6- Carbon or Cocoa - Alfred Scott 08:00:45 3/08/2004 (0)
- Re: PC6- Carbon or Cocoa - Alfred Scott 09:14:16 3/05/2004 (10)
  - Re: PC6- Carbon or Cocoa - Rob Munach 09:49:26 3/05/2004 (0)
  - Re: PC6- Carbon or Cocoa - Byron Balogh 09:43:21 3/05/2004 (5)
    - Re: PC6- Carbon or Cocoa - Alfred Scott 10:16:49 3/05/2004 (4)
      - Re: PC6- Carbon or Cocoa - CJH 16:54:34 3/05/2004 (0)
      - Re: PC6- Carbon or Cocoa - Byron Balogh 11:08:10 3/05/2004 (2)
        
        Re: PC6- Carbon or Cocoa - Alfred Scott 11:35:34 3/05/2004 (1)
        
        Re: PC6- Carbon or Cocoa - Byron Balogh 11:45:12 3/05/2004 (0)
  - Re: PC6- Carbon or Cocoa - Dave Z 09:39:50 3/05/2004 (2)
    - Re: PC6- Carbon or Cocoa - Bo 06:56:49 3/06/2004 (1)
      - Re: PC6- Carbon or Cocoa - jj 16:19:38 3/11/2004 (0)
print menu - smha 11:43:44 3/04/2004 (4)
- Re: print menu - huc 21:00:03 3/04/2004 (3)
  - Re: print menu - John Morse 07:00:19 3/05/2004 (2)
    - Re: print menu - GaryV 20:04:55 3/05/2004 (0)
    - Re: print menu - Jim 14:26:27 3/05/2004 (0)
Drafting Fonts - Gerald 11:33:02 3/04/2004 (4)
- Re: Drafting Fonts - pwn3d 11:27:59 3/08/2004 (0)
- Re: Drafting Fonts - MC 12:51:40 3/04/2004 (1)
  - Re: Drafting Fonts - Joseph Chen 14:56:01 3/17/2004 (0)
- Re: Drafting Fonts - Michael Charek 12:45:36 3/04/2004 (0)
Corrupt Drawings? - GordonH 08:31:17 3/04/2004 (3)
- Re: Corrupt Drawings? - Matt Arnold 11:07:37 3/04/2004 (2)
  - Re: Corrupt Drawings? - GordonH 04:14:49 3/05/2004 (1)
    - Re: Corrupt Drawings? - Matt Arnold 04:16:46 3/05/2004 (0)
Parking Lot Tool -- More Stuff - Alfred Scott 08:24:28 3/04/2004 (1)
- Re: Parking Lot Tool -- More Stuff - Rob Coolidge 20:04:06 3/04/2004 (0)
beam sizing software ? - greg gardner 21:56:46 3/03/2004 (3)
- Re: beam sizing software ? - Robert Sandkam 12:43:05 3/14/2004 (0)
- Re: beam sizing software ? - Rob 05:19:16 3/04/2004 (1)
  - Re: beam sizing software ? - patrick m a r r 06:40:56 3/04/2004 (0)
pdf printing w/ fill??? - Steve Ewoldt 10:37:16 3/03/2004 (8)
- Re: pdf printing w/ fill??? - Tom D. 10:39:51 3/05/2004 (0)
- Re: pdf printing w/ fill??? - David M 19:03:15 3/03/2004 (0)
- Re: pdf printing w/ fill??? - patrick m a r r 18:49:23 3/03/2004 (1)
  - Re: pdf printing w/ fill??? - patrick m a r r 06:46:03 3/04/2004 (0)
- Re: pdf printing w/ fill??? - CJH 10:54:36 3/03/2004 (3)
  - pdf printing w/ fill & referenced drawing dashed lines - James Dixon 11:21:30 3/03/2004 (2)
    - Re: pdf printing w/ fill & referenced drawing dashed lines - Bill 20:08:37 3/03/2004 (0)
    - Re: pdf printing w/ fill & referenced drawing dashed lines - CJH 12:23:51 3/03/2004 (0)
Parking Lot Tool -- Feedback Wanted - Alfred Scott 06:49:04 3/03/2004 (30)
- Re: Parking Lot Tool -- Feedback Wanted - Randy Shanks 14:20:19 3/03/2004 (2)
  - Re: Parking Lot Tool -- Feedback Wanted - huc 14:35:43 3/03/2004 (0)
  - Re: Parking Lot Tool -- Feedback Wanted - peter Baco t 14:34:34 3/03/2004 (0)
- Re: Parking Lot Tool -- Feedback Wanted - Joe Calabrese 13:21:23 3/03/2004 (0)
- Re: Parking Lot Tool -- Feedback Wanted - peter Baco t 11:16:32 3/03/2004 (2)
  - Re: Parking Lot Tool -- Feedback Wanted - Alfred Scott 12:10:39 3/03/2004 (1)
    - Re: Parking Lot Tool -ADA - pwn3d 10:19:35 3/04/2004 (0)
- Re: Parking Lot Tool -- Feedback Wanted - Byron Balogh 08:41:56 3/03/2004 (0)
- Re: Parking Lot Tool -- Feedback Wanted - David Scott 07:13:04 3/03/2004 (21)
  - Re: Parking Lot Tool -- Feedback Wanted - Dave Z 07:59:59 3/03/2004 (17)
    - Re: Parking Lot Tool -- Feedback Wanted - peter Baco t 11:20:29 3/03/2004 (16)
      - Why I haven't bought WT - Patrick Hansford 11:28:13 3/03/2004 (15)
        
        Re: Why I haven't bought WT - John Morse 13:44:44 3/03/2004 (0)
        
        Re: Parking Lot Tool / WT Purchase - GaryV 13:12:52 3/03/2004 (1)
        
        Re: Parking Lot Tool / WT Purchase - peter Baco t 14:29:42 3/03/2004 (0)
        
        Re: Why I haven't bought WT - Derek D 13:01:50 3/03/2004 (0)
        
        Re: Why I haven't bought WT - peter Baco t 12:24:44 3/03/2004 (1)
        
        Re: Why I haven't bought WT - Dave Z 13:07:02 3/03/2004 (0)
        
        Re: Why I haven't bought WT - Alfred Scott 12:03:40 3/03/2004 (8)
        
        Re: Why I haven't bought WT - Alfred Scott 12:06:08 3/03/2004 (7)
        
        Re: Why I haven't bought WT - Patrick Hansford 13:22:47 3/03/2004 (2)
        
        Re: Why I haven't bought WT - Alfred Scott 13:33:06 3/03/2004 (1)
        
        Re: Why I haven't bought WT - Patrick Hansford 13:35:17 3/03/2004 (0)
        
        Re: Why I haven't bought WT - Phil L o h e e d 13:22:10 3/03/2004 (3)
        
        Re: Why I haven't bought WT - Dave Z 13:52:42 3/03/2004 (0)
        
        Re: Why I haven't bought WT - Alfred Scott 13:43:09 3/03/2004 (1)
        
        Re: Why I haven't bought WT - Phil L o h e e d 14:28:41 3/03/2004 (0)
  - Re: Parking Lot Tool -- Feedback Wanted - Ed Groh 07:52:10 3/03/2004 (2)
    - Re: Parking Lot Tool -- Feedback Wanted - Ed Groh 07:54:15 3/03/2004 (1)
      - Re: Parking Lot Tool -- Feedback Wanted - Dave Z 08:02:50 3/03/2004 (0)
Selection Filter in PC6 - David Scott 03:30:07 3/02/2004 (4)
- Re: Selection Filter in PC6 - John Morse 06:23:41 3/02/2004 (0)
- Re: Selection Filter in PC6 - Ed Groh 06:08:07 3/02/2004 (2)
  - Re: Selection Filter in PC6 - ETEaster 07:46:48 3/02/2004 (1)
    - Re: Selection Filter in PC6 - Ed Groh 09:43:57 3/02/2004 (0)
Curved Arrows -- Feedback wanted. - Alfred Scott 09:37:53 3/01/2004 (7)
- Re: Curved Arrows -- Feedback wanted. - David Scott 03:10:31 3/02/2004 (0)
- Re: Curved Arrows -- Feedback wanted. - John Cruet 09:58:34 3/01/2004 (5)
  - Re: Curved Arrows -- Feedback wanted. - Alfred Scott 10:50:44 3/01/2004 (4)
    - Re: Curved Arrows -- Feedback wanted. - John Cruet 06:00:20 3/03/2004 (0)
    - Re: Curved Arrows -- Feedback wanted. - Jeffrey Jakucyk 07:56:10 3/02/2004 (2)
      - Re: "architectural" arrow - John Morse 08:36:00 3/02/2004 (1)
        
        Re: "architectural" arrow - Iain Stewart 10:19:46 3/03/2004 (0)
specifying new computers - Michael Spencer 04:49:21 3/01/2004 (7)
- Re: specifying new computers - Erik Mar 18:35:30 3/01/2004 (0)
- Re: specifying new computers - Ron Gillespie 14:01:38 3/01/2004 (1)
  - Re: specifying new computers--Rumors - Bo 14:47:21 3/01/2004 (0)
- Re: specifying new computers = TIC - Bo 07:37:12 3/01/2004 (3)
  - Re: specifying new computers = TIC - Bo 07:41:25 3/01/2004 (2)
    - Re: specifying new computers = TIC - Patrick Hansford 08:02:44 3/01/2004 (1)
      - Re: specifying new computers = TIC - Bo 12:51:44 3/01/2004 (0)

PowerCADD Forum — Current · DesignCommunity Search · DesignCommunity Home
PowerCADD Forum — 2003-12 · PowerCADD Forum — 2003-11 · PowerCADD Forum — 2003-10 · PowerCADD Forum — 2003-09 · PowerCADD Forum — 2003-08 · PowerCADD Forum — 2003-07 · PowerCADD Forum — 2003-06 · PowerCADD Forum — 2003-05 · PowerCADD Forum — 2003-04 · PowerCADD Forum — 2003-03 · PowerCADD Forum — 2003-02 · PowerCADD Forum — 2003-01 · PowerCADD Forum — 2002-12 · PowerCADD Forum — 2002-11 · PowerCADD Forum — 2002-10 · PowerCADD Forum — 2002-09 · PowerCADD Forum — 2002-08 · PowerCADD Forum — 2002-07 · PowerCADD Forum — 2002-06 · PowerCADD Forum — 2002-05 · PowerCADD Forum — 2002-04 · PowerCADD Forum — 2002-03 · PowerCADD Forum — 2002-02 · PowerCADD Forum — 2002-01 · PowerCADD Forum — 2001-12 · PowerCADD Forum — 2001-11 · PowerCADD Forum — 2001-10 · PowerCADD Forum — 2001-09 · PowerCADD Forum — 2001-08 · PowerCADD Forum — 2001-07 · PowerCADD Forum — 2001-06 · PowerCADD Forum — 2001-05 · PowerCADD Forum — 2001-04 · PowerCADD Forum — 2001-03 · PowerCADD Forum — 2001-02 · PowerCADD Forum — 2001-01 · PowerCADD Forum — 2000-12 · PowerCADD Forum — 2000-11 · PowerCADD Forum — 2000-10 · PowerCADD Forum — 2000-09 · PowerCADD Forum — 2000-08 · PowerCADD Forum — 2000-07 · PowerCADD Forum — 2000-06 · PowerCADD Forum — 2000-05 · PowerCADD Forum — 2000-04 · PowerCADD Forum — 2000-03 · PowerCADD Forum — 2000-02 · PowerCADD Forum — 2000-01

The underlying scripts and WWWBoard package used here were created by Matt Wright, and can be found at Matt's Script Archive

DesignCommunity Artifice CAD Outpost Great Buildings DesignWorkshop Free 3D Gallery Support Search

http://www.DesignCommunity.com/powercadd.html PowerCADD is a trademark of Engineered Software.
© 2000-2004 Artifice, Inc. - All Rights Reserved.

DesignCommunity Artifice CAD Outpost Great Buildings DesignWorkshop Free 3D Gallery Support Search
http://www.DesignCommunity.com/powercadd.html	PowerCADD is a trademark of Engineered Software. © 2000-2004 Artifice, Inc. - All Rights Reserved.